No i deer Posted January 2, 2022 Report Share Posted January 2, 2022 150yds. Held 15 minutes and let 5 go.. The reticle blocks out the orange disc.. Scope is definitely not the right one for longrange First 3 were good. The next 2 were lower. Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 2, 2022 Report Share Posted January 2, 2022 Tried 200yds and the wind took my shots off the target as the wind had picked up. I decided to move and go with a tail wind.. I left the 0.5 spindrift on from 150yds group and left the 0.5 left wind I had on shooting down the track.. I then held 25 minutes I had in the reticle and it was blocking out the target even more. First group Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 2, 2022 Report Share Posted January 2, 2022 For the next group I took off the spindrift and dialled a minute right and tried again.. Got lucky with one bang in the middle 🤪🤣 Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 2, 2022 Report Share Posted January 2, 2022 Took the wind back off and shot again.. 3 times back n forth across the boggy fields was enough. I won't bother any further until I've got a more suitable scope. Using 25 minutes on the reticle wasn't consistent between the 3 x 200yds groups.. It was interesting experiment all the same. Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 2, 2022 Report Share Posted January 2, 2022 My reticle.. 1 moa increments Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 3, 2022 Report Share Posted January 3, 2022 Went out again today.. Back to 50yds.. Yesterday I tweaked the action screws up 2lbs for the longer ranges... Well I dialled in 22lb on the wrench and it tightened.. I think I did 20lbs first and the wrench span like it's ment too so hopefully it is back how it was 🤞 I should of tried it at 50yds first yesterday... Not really sure what the torque was on.. I found today the eley match accuracy had changed for the worse not better.. I only had a multi-tool screwdriver on me too manage with.. I didn't get it shooting how it was.. I was well peed off with myself for changing it.. I reset torque too 20lbs when I got home.. Conditions were similar as before.. I started a new batch of eley match aswell.. Fired the 6 or 7 left from the previous batch for the first group.. it all become a blur as I was not happy 🤬. Back to work tomorrow so it will have to wait now 🙄 Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 9, 2022 Report Share Posted January 9, 2022 Check up after re-torquing action screws.. I was wrong about using new batch of ammo last Sunday.. I am now... Seems last week was either me or the conditions.. It's no voodoo but its not bad. 50yds again. Its still a bit drafty and right too left again Quote Link to comment Share on other sites More sharing options...
One on top of two Posted January 9, 2022 Report Share Posted January 9, 2022 What did you re-torque them to Neil ? if you can print groups like that. Do you think your gain much . Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 9, 2022 Report Share Posted January 9, 2022 1 hour ago, One on top of two said: What did you re-torque them to Neil ? if you can print groups like that. Do you think your gain much . I reset them to 20lbf. Until I put a scope better suited for long-range I can't really say how my CZ452 will perform.. I just can't see it shooting like the voodoo..!! I'm not familiar with other rimfires but I don't like the action screw 4 inches up the barrel from the front of the action. Quote Link to comment Share on other sites More sharing options...
Adamdavi3s Posted January 16, 2022 Report Share Posted January 16, 2022 On 1/2/2022 at 6:38 PM, terryh said: Could always use a concentricity gauge and sort your rounds as well 🤔😂 I’ve not tried the concentricity gauge but on SK Long Range Match, no noticeable difference with rim thickness on a Hornady gauge. 8thou difference in ”seating depth” and sorting by that had definitely helped in the RPR. I still think I’m chasing accuracy that isn’t going to exist though, sub 1” @100 is possible but it’s usually between 1-1.5” had the chance to run out to 274yards today and could hit a 6” plate fine, but with the 3” it was dancing around with some strikes. Could have been the very light wind at that range to be fair Quote Link to comment Share on other sites More sharing options...
terryh Posted January 23, 2022 Report Share Posted January 23, 2022 My club ran a 100 yard target comp yesterday on a local range. Unlimited sighters and 5 x 10 round targets. Front rest allowed but no rear support ( butt in shoulder clear of ground/ bench. Not too much wind around but time limit put pressure on. Rifles was in all down to operator interference I’m afraid 😱 Quote Link to comment Share on other sites More sharing options...
1066 Posted January 23, 2022 Report Share Posted January 23, 2022 That looks very respectable Terry. Quote Link to comment Share on other sites More sharing options...
terryh Posted January 23, 2022 Report Share Posted January 23, 2022 1 hour ago, 1066 said: That looks very respectable Terry. Thank you Sir, was quite pleased myself 😉 Quote Link to comment Share on other sites More sharing options...
Bangbangman Posted January 23, 2022 Report Share Posted January 23, 2022 Shot a couple of groups at 100m/110yds at the range yesterday. Cold but still. Bipod and rear bag of a bench. Might try a barrel-tuner some point. Quote Link to comment Share on other sites More sharing options...
Bangbangman Posted January 23, 2022 Report Share Posted January 23, 2022 4 hours ago, terryh said: My club ran a 100 yard target comp yesterday on a local range. Unlimited sighters and 5 x 10 round targets. Front rest allowed but no rear support ( butt in shoulder clear of ground/ bench. Not too much wind around but time limit put pressure on. Rifles was in all down to operator interference I’m afraid 😱 I'd say the operator interference worked out very nicely! Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 24, 2022 Report Share Posted January 24, 2022 17 hours ago, terryh said: My club ran a 100 yard target comp yesterday on a local range. Unlimited sighters and 5 x 10 round targets. Front rest allowed but no rear support ( butt in shoulder clear of ground/ bench. Not too much wind around but time limit put pressure on. Rifles was in all down to operator interference I’m afraid 😱 Do you shoot a voodoo Terry..? Quote Link to comment Share on other sites More sharing options...
terryh Posted January 24, 2022 Report Share Posted January 24, 2022 1 hour ago, No i deer said: Do you shoot a voodoo Terry..? Yes, had it about 6 months now. Quote Link to comment Share on other sites More sharing options...
lapua Posted January 24, 2022 Report Share Posted January 24, 2022 16 minutes ago, terryh said: Yes, had it about 6 months now. What scope did you settle on? High mag March? Quote Link to comment Share on other sites More sharing options...
terryh Posted January 24, 2022 Report Share Posted January 24, 2022 13 minutes ago, lapua said: What scope did you settle on? High mag March? Lapua, Yes 10-60 March High master. Idea was to create a 22rf clone of my 6 Dasher, Dasher top image, 22rf Vudoo lower the 22rf uses a EraTac adjustable base for the LR comps. Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 24, 2022 Report Share Posted January 24, 2022 1 hour ago, terryh said: Yes, had it about 6 months now. Where from and how much did it cost.. You can pm me if you'd rather not say.. Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 24, 2022 Report Share Posted January 24, 2022 Shot this from 200yds last Sunday.. Posted it on anther thread by accident. Really enjoyed shooting it longer ranges.. Shot strait into the wind the best I could.. Used 25 moa reticle to shoot it with no adjusting. CZ452 eley match.. You may have seen the photos Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 24, 2022 Report Share Posted January 24, 2022 1 hour ago, terryh said: Lapua, Yes 10-60 March High master. Idea was to create a 22rf clone of my 6 Dasher, Dasher top image, 22rf Vudoo lower the 22rf uses a EraTac adjustable base for the LR comps. That 22 set up was a few Bob then 🙃 Quote Link to comment Share on other sites More sharing options...
terryh Posted January 24, 2022 Report Share Posted January 24, 2022 48 minutes ago, No i deer said: Shot this from 200yds last Sunday.. Posted it on anther thread by accident. Really enjoyed shooting it longer ranges.. Shot strait into the wind the best I could.. Used 25 moa reticle to shoot it with no adjusting. CZ452 eley match.. You may have seen the photos 200 yards is quite 'do-able', this is 20 round group shot at Orion on a bit of a wet/mildly windy day: Vudoo, Centre-X Quote Link to comment Share on other sites More sharing options...
terryh Posted January 24, 2022 Report Share Posted January 24, 2022 49 minutes ago, No i deer said: That 22 set up was a few Bob then 🙃 😎 retirement present (well 'planning on retiring present') - but don't tell the wife 🤐 Quote Link to comment Share on other sites More sharing options...
No i deer Posted January 24, 2022 Report Share Posted January 24, 2022 2 hours ago, terryh said: 😎 retirement present (well 'planning on retiring present') - but don't tell the wife 🤐 Definitely don't tell the wife 😊 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.