Rangefinder Posted August 14, 2018 Report Share Posted August 14, 2018 Hi has anyone had any experience of this round ? tbanks Jimmy Quote Link to comment Share on other sites More sharing options...
GT3_richy Posted August 14, 2018 Report Share Posted August 14, 2018 Don't imagine there are too many in the UK as its still pretty fresh in the US. Performance is not dissimilar to the 6.5 SAUM (the SAUM pushes an extra 100fps or so with 140s) but with the bonus of easier/more reliable feeding. There's a bookface group called "6.5 SAUM, GAP 4S, 6.5 PRC Forum" which is administrated by George Gardner of GAP - youll find some decent info there if you can be bothered to trawl. There are a couple of videos and pinned bits that might be of interest. Quote Link to comment Share on other sites More sharing options...
Rangefinder Posted August 15, 2018 Author Report Share Posted August 15, 2018 Thanks, I’ll checkout the group Quote Link to comment Share on other sites More sharing options...
Chanonry Posted August 15, 2018 Report Share Posted August 15, 2018 What is it that the PRC gives us that we can't already get ? Quote Link to comment Share on other sites More sharing options...
trucraft Posted August 15, 2018 Report Share Posted August 15, 2018 8 minutes ago, Chanonry said: What is it that the PRC gives us that we can't already get ? When and if Hornady factory ammo turns up here. You get a 6.5 short action mag that will shoot factory ammo. Not going to change the industry by any means but if it became available over here it would be cool. I think anything that gives us shooters more choice is a good thing. Unfortunately it's Hornady that are giving it to us? I think a 6mm PRC would be interesting. http://bulletin.accurateshooter.com/2018/08/its-official-saami-approves-hornady-6-5-prc-and-300-prc/ Quote Link to comment Share on other sites More sharing options...
baldie Posted August 15, 2018 Report Share Posted August 15, 2018 Hmm... Been chewing this one over for some time. 1. Looking at the SAAMI spec, the maximum OAL will just go into a AX double stack mag, though it would require modification to the follower. 2. It will runs similar speeds with same bullet weights as a creedmoor, but the CM will need 28" and the PRC around 22" 3. Only trouble is that Hornady make the brass. The CM brass is renowned for getting trashed at top end loads/speeds. Personally, I think it would be better built on a magnum long action , to make better use of seating depths. It would feed from an AI .300wm mag. Sod it, i'll get a reamer. Man's gotta have a hobby. ? Quote Link to comment Share on other sites More sharing options...
Catch-22 Posted August 15, 2018 Report Share Posted August 15, 2018 Interesting critique of the 6.5 PRC on Accurate shooter a while back. http://bulletin.accurateshooter.com/2017/10/new-hornady-6-5-prc-precision-rifle-cartridge/ The main criticism is that it offers only marginal performance over a 6.5 Creedmoor or .260rem. It's basically on par with a 6.5-284 which doesn't require a Magnum bolt face and uses Lapua brass which is infinitely better than Hornadys. It also offers performance akin to other established magnums, such as the 7WSM and 6.5SAUM...so it's not really doing anything new. It will be a barrel burner though - maybe expect between 1,000 to 1,500 rounds at full whack before it's toast. But it is new and shiny...it may prove to be more accurate or easier to tune than the rest. Only one way to find out perhaps?!? Quote Link to comment Share on other sites More sharing options...
baldie Posted August 15, 2018 Report Share Posted August 15, 2018 The big difference being, this will work in a short action with heavy bullets. The 6.5 x 284 won't. It was designed primarily as a PRS round. They dont use long actions. Quote Link to comment Share on other sites More sharing options...
Catch-22 Posted August 15, 2018 Report Share Posted August 15, 2018 16 minutes ago, baldie said: The big difference being, this will work in a short action with heavy bullets. The 6.5 x 284 won't. It was designed primarily as a PRS round. They dont use long actions. Sure, I understand that but why the 6.5PRS and not the 7WSM, 6.5SAUM, 7SAUM, considering there's virtually no difference between them. If people think it truly offers something different and want it...great. Personally I think it's just yet another pointless cartridge by a manufacturer trying to cash in on all the hype and growth around the PRS scene. Quote Link to comment Share on other sites More sharing options...
Deserttech Europe Posted August 15, 2018 Report Share Posted August 15, 2018 It is supposed to feed perfectly from a Mag, the others listed are not ideal in this regard. Ewen Quote Link to comment Share on other sites More sharing options...
bradders Posted August 15, 2018 Report Share Posted August 15, 2018 2 hours ago, baldie said: The big difference being, this will work in a short action with heavy bullets. The 6.5 x 284 won't. It was designed primarily as a PRS round. They dont use long actions. And nobody here shoots PRS......except when the fantasies run wild in their minds Quote Link to comment Share on other sites More sharing options...
Ronin Posted August 16, 2018 Report Share Posted August 16, 2018 Though it may be something which would appeal to many shooters in the UK if there was some enterprising soul who would arrange an initial come as you are comp There are plenty of ranges in the uk which could host this type of event Diggle, Eskdalemuir, Powys immediately spring to mind as areas which this might be possible It isn’t beyond the realm of possibility Quote Link to comment Share on other sites More sharing options...
bradders Posted August 16, 2018 Report Share Posted August 16, 2018 1 hour ago, Ronin said: Though it may be something which would appeal to many shooters in the UK if there was some enterprising soul who would arrange an initial come as you are comp There are plenty of ranges in the uk which could host this type of event Diggle, Eskdalemuir, Powys immediately spring to mind as areas which this might be possible It isn’t beyond the realm of possibility I briefly mulled over the idea of organising a PRS type match (at Orion), however the practicalities of doing such a thing made it unfeasible Firstly you need a lot of targets then you need a Cof/Match You would also require a team of people to assist setup and transport vehicles and you would also need to "prove" the match which would require a couple of days of test shooting and making amendments/adjustments to the CoF and targets I estimated you would all need to spend 5-7 days there, all the while that they are also trying to run it around you as a commercial enterprise. With targetry, travel and accommodation costs for everyone, you would be hard pressed to recoup your costs within an entry fee that people would find acceptable....so that was the end of that Diggle is a KD (known distance) range, so therefore no different to Bisley etc, when what is preferred is a UKD (Unknown Distance) range, and not conducive to what a PRS style match would be While I haven't been to Eskdalemuir, from pics it looks like a single valley/range, so running multiple stages would be an issue which would lead to log jams, bottlenecks, a loss of shooting time and inevitably mass grumblings from shooters who have paid their fees and also to unnecessary stress put upon the organisers Quote Link to comment Share on other sites More sharing options...
Ronin Posted August 16, 2018 Report Share Posted August 16, 2018 Thanks for the response Mark Interesting to hear the get your viewpoint, given you’ve run so many comps. Upu could be right that the only site available that’s currently passed for use would be the Powys sites - central travelling time for many. Targetry on site and multiple lines of fire abailable ? Would there be the feasibility to use this as the only site for a PRS style Comp but have several matches over the course of a year using different areas of the site ? Maybe wouldn’t appeal to those north of the Scottish border due to travelling time but it could work for many south of the border,,,,? Quote Link to comment Share on other sites More sharing options...
bradders Posted August 16, 2018 Report Share Posted August 16, 2018 44 minutes ago, Ronin said: Thanks for the response Mark Interesting to hear the get your viewpoint, given you’ve run so many comps. Upu could be right that the only site available that’s currently passed for use would be the Powys sites - central travelling time for many. Targetry on site and multiple lines of fire abailable ? Would there be the feasibility to use this as the only site for a PRS style Comp but have several matches over the course of a year using different areas of the site ? Maybe wouldn’t appeal to those north of the Scottish border due to travelling time but it could work for many south of the border,,,,? It would require a lot of planning sadly and the targetry onsite isn't what I'd envisage For example I would envision stages with for example 5 targets set at varied distances, 140, 325, 485, 610, 775yds etc of differing sizes, reactors and fixed clangers with stuff like walls, fences, barricades and such to shoot off/from/over/behind You'd need to recce the land and see where you would be setting up and then proving it.....it would all be a lot of work and all quite some way from home I'm not saying it can't be done, but I ruled myself out and there are other people out there who are probably more motivated than me All it requires is the right people to step up with their enthusiasm and ideas...and to agree costs with the site owners and set fees after your costs are deducted Matches in the US are spendy, we once entered a 3 gun match in AZ that was nearly $300 per person, but over here people would baulk at those sort of fees, it's a difficult balance Quote Link to comment Share on other sites More sharing options...
lapua Posted August 16, 2018 Report Share Posted August 16, 2018 The roundhouse offers shooting similar to this Quote Link to comment Share on other sites More sharing options...
David Hancock Posted August 16, 2018 Report Share Posted August 16, 2018 Article today on www.6mmbr.com about the PRC calibre. Worth a shuftie . . . Quote Link to comment Share on other sites More sharing options...
Bangbangman Posted August 16, 2018 Report Share Posted August 16, 2018 Roundhouse, as above.. Love it! It can be done (not that I’m volunteering.) Quote Link to comment Share on other sites More sharing options...
lee w 118 Posted December 28, 2020 Report Share Posted December 28, 2020 On 8/15/2018 at 9:08 AM, trucraft said: When and if Hornady factory ammo turns up here. You get a 6.5 short action mag that will shoot factory ammo. Not going to change the industry by any means but if it became available over here it would be cool. I think anything that gives us shooters more choice is a good thing. Unfortunately it's Hornady that are giving it to us? I think a 6mm PRC would be interesting. http://bulletin.accurateshooter.com/2018/08/its-official-saami-approves-hornady-6-5-prc-and-300-prc/ Its got my attention in 6mm PRC and 70g bullets 😁 it will be fun Quote Link to comment Share on other sites More sharing options...
GT3_richy Posted December 28, 2020 Report Share Posted December 28, 2020 Perhaps not for very long however 😜 Quote Link to comment Share on other sites More sharing options...
stephentri Posted December 28, 2020 Report Share Posted December 28, 2020 What's barrel life like with a 6.5 prc Quote Link to comment Share on other sites More sharing options...
One on top of two Posted December 28, 2020 Report Share Posted December 28, 2020 1 hour ago, stephentri said: What's barrel life like with a 6.5 prc about the same as a 6.5x284 Quote Link to comment Share on other sites More sharing options...
trucraft Posted December 28, 2020 Report Share Posted December 28, 2020 5 hours ago, lee w 118 said: Its got my attention in 6mm PRC and 70g bullets 😁 it will be fun Be a fun way to burn a barrel. Def on my bucket list. Quote Link to comment Share on other sites More sharing options...
lee w 118 Posted December 28, 2020 Report Share Posted December 28, 2020 Be a fun cartridge for varminting. Whatch this space 😁 Quote Link to comment Share on other sites More sharing options...
Hobbit Posted February 9, 2021 Report Share Posted February 9, 2021 On 8/15/2018 at 5:24 PM, baldie said: Hmm... Been chewing this one over for some time. 1. Looking at the SAAMI spec, the maximum OAL will just go into a AX double stack mag, though it would require modification to the follower. 2. It will runs similar speeds with same bullet weights as a creedmoor, but the CM will need 28" and the PRC around 22" 3. Only trouble is that Hornady make the brass. The CM brass is renowned for getting trashed at top end loads/speeds. Personally, I think it would be better built on a magnum long action , to make better use of seating depths. It would feed from an AI .300wm mag. Sod it, i'll get a reamer. Man's gotta have a hobby. ? Baldie I see that Lapua is now doing 6.5PRC brass. I have an AI AXMC with barrels, bolts and mags for both .308 and 300 win mag. Based on what you are saying (as an AI gunsmith) if I was interested in a 6.5PRC barrel then I would be better using the win mag mags rather than cramming the 6.5PRC into the short action mags (which I just measures at a a shade over 3"s) - would there be feed issues in this case? On a related not - if I wanted a 300 Norma then I would just get the 338 lap bolt and mags presumably? Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.