No i deer

🙄😴

No I did not miss the target Justin 😴 Justin has used about 1500 of the 180gr ELDM's in his 284 and he's not had any blow up that's why he suggests I missed the target.. I was shooting V's and 5's at 300 and 600yds at the time I had the blank targets.. I've never had a blank target before I used the ELDM's. After the bullet didn't make the target at 600yds in the last match I got 2 other shooters to watch me shoot off the last 8 cartridges watching for another blow up. All V's and 5's none blew..!! I've put several hundred of them through my 284 without a problem.. Some shooters have run them at 3200fps in there 280 noslers without a blow up and some say string shoot in there 284s and they'll blow up 🤔. It's very random occurrences. Maybe inconsistent jacket thicknesses 🤔.

I've not tried them for hunting but I've been a big fan of the amaxs... 6.5 cal 140gr and the 7mm 162grs. I've nearly got the 7mm 162gr ELDX's to shoot nice. Shot this 5 shot group with 180gr ELDM's a few days ago with my 284 off a bipod and bean bag thing

That would depend.. Shooting strings of shots will get the barrel hot.. The odd shot it will probaly last forever... My current 1 in 9 twist barrel has done I think 1630 shots and must be nearing the end of its life.. The worn barrel may have contributed to the ELDMs blowing up 🤔. Never had any hybrids not make the target..!! I only shot 3 or 4 matches with them and the last 2 I had blank targets.. Dropping a point hurts... 5 points is total disaster.. If You checkout accurate shooter there's plenty of info on them blowing up, usually happens before 300yds....

So far I've used H1000 and N165. Both really good and kind on barrels so far.. As H1000 isn't reach compliant and dried up so I now I use N165 and wouldn't change back.. It's slightly faster and you can tell as it's snappier.. shoots the 184gr hybrids superbly. You don't say how long your barrel is...? I've had 180gr ELDM's blow up and not make the target in matches so I've stopped using them in matches...!! very accurate bullets though...!! My 284 shoots them great too at 160fps slower

How windy..?? It's been quite blowy here but not near the 40mph gusts predicted 🤔

Some of the frames are far worse than the others. TBH I don't think I've ever used an easy one that I can recall...!! We started using 2 shooters per target as some were so hard too operate. It's certainly long overdue some modernisation.

Well it's your forum and your the moderators so you need get your act together and think of a way to stop these scammers asap if not sooner 😁😆🤣

The photo isnt clear for me.. Is there somewhere forvthe sling too attach..!!

Scenars are hard too beat. I've not tried the 140gr hybrids in my 6.5x47 but if they shoot better than the 139gr scenars they'd have to shoot 1 hole. I can't say enough good things about scenars.. Having trouble with the 7mm 162gr eldxs but I'm probaly trying to push them hard.

It was the failure in 308 with the ELDM'S I was referring too..!! These bullets seem too like just touching the rifling 👍

Calibre 🤔

Why is that do you think 🤔

I'm glad to hear you've got everything under control BD 👍😁

Maybe Brown dog should put up a wanted advert and see if any of these scammers apply then block them or whatever you do..

Any chance of seeing this mounted on a rifle with the sling swivel adaptor being used..?

I agree too.. Not everybody can see a scammer especially people who don't use computers and such devices as much as others as there not expecting to be conned. Alot of us are so naive in this area. Too trusting I guess..

👍

It's a NO..!!

Ok thanks. I'll order one then 👍

100 miles each way for me. 2hrs each way

What bag rider is it please..?? if Its a sinclair one that attached to an anschults rail and is in A1 condition I will have it..!!

1 hour max per target per person isn't any good if you have too travel hours to get there.. Ok for local shooters 🙄

See wishful thinking saves the day 😁😎💋💋

I had my action screws out and filed the front screw down a bit.. It could possibly go in to far and touch the barrel chamber.. I tightened it up pretty tight after and the bolt didn't bind so this may have done the trick. The next time I take a look I will put some marker pen or something on the end of the screw and see if any of it rubs off on where it could touch that way I will know if I've licked enough off..!! Thanks for that top tip 😁👍