No i deer

I'm glad to hear you've got everything under control BD 👍😁

Maybe Brown dog should put up a wanted advert and see if any of these scammers apply then block them or whatever you do..

Any chance of seeing this mounted on a rifle with the sling swivel adaptor being used..?

I agree too.. Not everybody can see a scammer especially people who don't use computers and such devices as much as others as there not expecting to be conned. Alot of us are so naive in this area. Too trusting I guess..

👍

It's a NO..!!

Ok thanks. I'll order one then 👍

100 miles each way for me. 2hrs each way

What bag rider is it please..?? if Its a sinclair one that attached to an anschults rail and is in A1 condition I will have it..!!

1 hour max per target per person isn't any good if you have too travel hours to get there.. Ok for local shooters 🙄

See wishful thinking saves the day 😁😎💋💋

I had my action screws out and filed the front screw down a bit.. It could possibly go in to far and touch the barrel chamber.. I tightened it up pretty tight after and the bolt didn't bind so this may have done the trick. The next time I take a look I will put some marker pen or something on the end of the screw and see if any of it rubs off on where it could touch that way I will know if I've licked enough off..!! Thanks for that top tip 😁👍

Zippedey doo daa 😁

Ok thank you sir.. I will have too source some nuts first..!! This will save messing around pillar or fully bedding hopefully 👍

Hi MPM1 Out of intrest how did you come to the conclusion the screw was too long and how is shortening the screws a few threads going to help..?? Thanks NID

Thank you. I will get around to it over the next few days 👍 I will compare the screws before I take any threads off just incase the other ones I have are shorter.

I have a spare set of remmy action screws I could try.. thanks for that tip MPM1 👍

KRG whiskey 3 stock is a aluminium vblock chassis.. It may need some pillars or the full works.. My remmy action must be much stiffer as I've never had that issue with my 6.5x47 in the AICS stock or it has the perfect fit

I've added some weight to my f open KRG whiskey 3 stock so it helps with the torquing. If I had a 1.250 parallel barrel I'd be still under ok. I think my fairly recent barrel is a tad heavier than my older barrel being it's about 1 inch at the muzzle and still 1lb and a half under the limit. A spur mount would be an expensive weight add on 😅. I'd rather spend the money on more bullets and powder 👍. The spur mount would stiffen up my Borden timberline action would be a good thing because if I over tighten a fraction it affects the bolt running smoothly.. back the action screw off a fag paper and it runs sweet again.. I've been looking at torque wrenches of late so I know what I'm torquing it too.. Bicycle wrench sets look the best option so far

I've seen other mounts like spur mounts etc but wasn't aware of a unimount pops. Like I said my knowledge on this stuff is limited that's why I asked 😉. Seen stuff that was of no real intrest as it is expensive aesthetics goodies 😁

Thanks for replies.. TBH my favourite rings are the optilock sako and tikka rings. A solid fixing too the action with no farty little screws holding on the pic rail. Bolted strait too the action with recoil lugs and tapered dovetail with the inserts. Too much of the fancy stuff around that just cost alot of money. I've never had an issue with optilocks.

I was looking through dolphin precision engineering site and noticed these unimounts.. I'm not big into scope rings and mounts and had no I deer what a unimount is..!! Can someone care to enlighten me 🤙

Are you still selling this rifle 🤔

It's got a silly thread size

I would of liked it but I'm not buying another gun I can't shoot 🙄