Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 On 10/30/2021 at 3:55 PM, No i deer said: Hi @No i deer with 2 holes touching I would guess it should measure at lease .2” centre to centre as @Silvermachinehas said given that’s the diameter of the bullet. 0.137 would be over a half lapping hole/ near single hole? Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 28 minutes ago, bowji john said: Pics as promised Right hand one is 5 shot group of approx 0.45" at 100m Left hand one is just about a third of an inch(ish) but only a 3 round group and only at 80 m Second photo is of the Vudoo Lovely set up… what’s sitting on top? Quote Link to comment Share on other sites More sharing options...
bowji john Posted November 1, 2021 Report Share Posted November 1, 2021 Leupold Mark 5HD 5 - 25 x 56 FFP scope (35mm tube) with a 20 MOA picatinny rail and a 20MOA mount giving a total of 40 MOA The rifle shares the chassis with a 6.5 creed seen below Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 1 minute ago, bowji john said: Leupold Mark 5HD 5 - 25 x 56 FFP scope (35mm tube) with a 20 MOA picatinny rail and a 20MOA mount giving a total of 40 MOA The rifle shares the chassis with a 6.5 creed seen below Very nice. Can I ask who you used in the UK to get it? Quote Link to comment Share on other sites More sharing options...
One on top of two Posted November 1, 2021 Report Share Posted November 1, 2021 Tasty 👍 Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 Here are some targets from the other day zeroing at 100yrds. I measured the best groups obviously! 😉 and I’m going to blame wind, and scope twiddling on the rest 🤣 need to try harder to get consistent! Quote Link to comment Share on other sites More sharing options...
bowji john Posted November 1, 2021 Report Share Posted November 1, 2021 54 minutes ago, Farmer rick said: Very nice. Can I ask who you used in the UK to get it? The 6.5 creed was built by our very own Ronin on here 🙂 The Vudoo was imported by Ken from Shield sights who was very helpful Quote Link to comment Share on other sites More sharing options...
Ballistol Posted November 1, 2021 Report Share Posted November 1, 2021 1 hour ago, Farmer rick said: Here are some targets from the other day zeroing at 100yrds. I measured the best groups obviously! 😉 and I’m going to blame wind, and scope twiddling on the rest 🤣 need to try harder to get consistent! Absolutely superb, well shot sir. Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 Much appreciated @Ballistol 2 minutes ago, Ballistol said: Absolutely superb, well shot sir. Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 25 minutes ago, bowji john said: The 6.5 creed was built by our very own Ronin on here 🙂 The Vudoo was imported by Ken from Shield sights who was very helpful I guess you got just a barrelled action for the Vudoo, Could I ask how much it ended with duties and vat? Quote Link to comment Share on other sites More sharing options...
bowji john Posted November 1, 2021 Report Share Posted November 1, 2021 It cost £2000.00 all in, including a 2 stage triggertech diamond trigger and one magazine long wait though - 8 months Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 15 minutes ago, bowji john said: It cost £2000.00 all in, including a 2 stage triggertech diamond trigger and one magazine long wait though - 8 months Thanks @bowji john might stick with my set up for now! Nice bit of kit tho 👍 Quote Link to comment Share on other sites More sharing options...
lapua Posted November 1, 2021 Report Share Posted November 1, 2021 2 hours ago, Farmer rick said: Hi @No i deer with 2 holes touching I would guess it should measure at lease .2” centre to centre as @Silvermachinehas said given that’s the diameter of the bullet. 0.137 would be over a half lapping hole/ near single hole? i didn't want to mention that!😆 Quote Link to comment Share on other sites More sharing options...
lapua Posted November 1, 2021 Report Share Posted November 1, 2021 23 minutes ago, bowji john said: It cost £2000.00 all in, including a 2 stage triggertech diamond trigger and one magazine long wait though - 8 months im doing similar with a borden alpine creedmoore and a bergara b14r with a triggertech, same MPA chassis though. hope to do a bit more ammo teting this week. not as gucchi as yours but similar accuracy. Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 4 minutes ago, lapua said: i didn't want to mention that!😆 Maybe this is why Erik Cortina is so good! We’ve been doing it the wrong way 😜 Quote Link to comment Share on other sites More sharing options...
lapua Posted November 1, 2021 Report Share Posted November 1, 2021 Quote Link to comment Share on other sites More sharing options...
bowji john Posted November 1, 2021 Report Share Posted November 1, 2021 Nice ! The MPA chassis are pretty good I think I got a chance to shoot a a bergara b14r and found it highly accurate - didn't like the standard trigger though The triggertech is a great improvement and easily adjustable I suppose I should experiment with a wider range of ammo - the vudoo has been created around the centre x I'm pleased with the special match so far. R100 seems to come alive over 150m but not so special below 100m Not tried centre x yet Quote Link to comment Share on other sites More sharing options...
bowji john Posted November 1, 2021 Report Share Posted November 1, 2021 2 hours ago, Farmer rick said: Here are some targets from the other day zeroing at 100yrds. I measured the best groups obviously! 😉 and I’m going to blame wind, and scope twiddling on the rest 🤣 need to try harder to get consistent! Are those 1" targets? Super shooting - I'd be happy with your cast offs🙂 Quote Link to comment Share on other sites More sharing options...
No i deer Posted November 1, 2021 Report Share Posted November 1, 2021 Some really nice groups there Rick 👏 . I'll measure edge edge and subtract.. Sounds like measuring the cardboard target won't be accurate anyway 🤪 Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 27 minutes ago, bowji john said: Are those 1" targets? Super shooting - I'd be happy with your cast offs🙂 Yes, 1" dots - It has done a lot better, think a barrel clean is needed. I'm also thinking of some weights for the chassis... try and minimise any movement and maybe play with the trigger a little, I find 22 an interesting calibre to master! @No i deer I use Sub Moa app to keep track and do the measurements, it works pretty well - well as good as callipers anyway, its a good tool to keep a record in. Quote Link to comment Share on other sites More sharing options...
No i deer Posted November 1, 2021 Report Share Posted November 1, 2021 I saw something like that on the playstore and it was £7 so I didn't bother 🤣 Quote Link to comment Share on other sites More sharing options...
No i deer Posted November 1, 2021 Report Share Posted November 1, 2021 I watched a video on YouTube earlier somebody shooting the Voodoo.. Looks very very accurate Quote Link to comment Share on other sites More sharing options...
Farmer rick Posted November 1, 2021 Report Share Posted November 1, 2021 1 hour ago, No i deer said: I saw something like that on the playstore and it was £7 so I didn't bother 🤣 I’m sure it was free… I don’t like paying for things 🤣 Quote Link to comment Share on other sites More sharing options...
fourtyvoats Posted November 2, 2021 Report Share Posted November 2, 2021 I have no doubt that the Voodoo rifles are very good and accurate. The question you have to ask is "are they more accurate than a stock 1710" or even "are they more accurate than a tricked out 1710", either of which costs less money. When you look at all the variables that go into setting up a .22LR to shoot well, the most significant of which is the shooter, this would be a time consuming and expensive trial to create. Quote Link to comment Share on other sites More sharing options...
bowji john Posted November 3, 2021 Report Share Posted November 3, 2021 14 hours ago, fourtyvoats said: I have no doubt that the Voodoo rifles are very good and accurate. The question you have to ask is "are they more accurate than a stock 1710" or even "are they more accurate than a tricked out 1710", either of which costs less money. When you look at all the variables that go into setting up a .22LR to shoot well, the most significant of which is the shooter, this would be a time consuming and expensive trial to create. These are good questions Some of them addressed quite well I think in Michael Shea's book Rimfire Revolution I've found that there are ''many routes to Damascus'' regarding accurate rim fire shooting - a journey I find as fascinating as it is frustrating 🙂 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.