John MH

N160 worked well with 105 Scenars and 107 SMKs, start at around 38 Grains and work up from there. RL17 (RS60) also works well but I use that with 115 Grain Bullets.

Mine works as advanced no problem.

Usually that is the case if you take the plunge.

Please follow the Sales Rules and put your location in your profile.

Please follow the Sales Rules and put your location in your profile.

Please follow the Sales Rules and put your location in your profile.

What was the Entry fee?

Now on Exmoor too.

All at the Pro-Shoot Range in Caerphilly, South Wales,

True, I emailed then about ammo availability before the Imperial and never got a reply.

https://bulletin.accurateshooter.com/2023/08/excellent-holland-upgrade-for-rcbs-bench-priming-system/ An alternative as an improvement to a RCBS Auto Prime Bench Mounted Primer if you can get one shipped.

Primal Rights CPS cannot be beaten but a bit pricey.

Will be interesting to see how much they charge for a day's shooting.

IYHO Does it work?

😆

He's been flagged as a Spammer and is now blocked.

Not the in the twin room I and Benjamin stayed in during the Imperial.

A lot less faffing, you can try it out in October.

Speedtracker = Bulletseeker Yes, works well, simple set up, deal on with March Scopes (UK) for Chrono with Parabolic Adapter (recommend you get one). Got mine from USA from Longshotcameras, was cheaper that UK at the time even with Duty &VAT but not anymore.

Do you mean a Bulletseeker?

Arrived and, as described, in Mint Condition.

Furthest I've used mine is 650 yards but should be good out to 1000 yds, no maximum for frame size quoted in manual and I've seen some that were at least 8' x 8'.

Not sure if they would but if they did I would suggest that the Butts are cleared of personnel so if a Sensor or Hub is hit then no one gets fragged.

Show us how you have set up your Shotmarker System. This one fits in the back of my Nissan Navara. Can be set at 12 Inches off the deck or 4 Feet off on a Steel Target Company HD Target Stand.

Get your own Shotmarker. I recently remade my Target Frame and have mated it with a Steel Target Company HD Stand Cross Bar, I can position the Shotmarker Target either 12 inches off the deck or 4 feet of the deck. Tested on Friday in Devon, wind was blowing a bit but the target remained upright all day.