Nick-St

Hi - Yes, it’s sold.

Sold!

34mm Tube, DT MTC Locking Elevation Turret, Standard Capped Windage Turret, Parallax Adjustable, Illuminated FFP P4F Reticle, Mil Adjustment, Tenebraex Lens Covers. Excellent condition, very minor wear on the parallax and windage rings. £2300 inc RM Special Delivery Also available with the Spuhr SP-4002 0 Mil Mount in the pictures for an additional £200 3-20x50 Ultra Short User Manual.pdf S&B P4FL FFP 3-20x50 PMII Reticle.pdf

Yes - they stay closed. To open/fold the main legs you push the buttons on the sides. For the leg extension you push the button at the bottom of the leg and they pop out under spring pressure. PM me you details if you’re still interested. Nick

180mm spring loaded telescoping aluminium legs Tilt head with QD Picatinny adapter Podlock fitted (Original tilt screw and spanner included) Standard Rubber feet, claw feet and ski feet included (Claws & skis unused) Tier-One case Excellent condition £200 inc Special Delivery postage

Used, no ratchet bar fitted (I don't use the ratchet on the press) but comes with the three different lengths for the RL1050 / Super 1050 & RL1100 - £150 Another one, but with no ratchet bars - £130 Collection from Chessington / Wimbledon or Bisley by arrangement, or postage at cost.

I'll take the moderator & cover if you're selling that separately?

I sent mine for repair a while ago (same dimming issue) - no customs issues coming back - but I had to pay $199 for the international out of warranty repair. The $79 is the mainland USA repair cost, so the OP got lucky!

Just in case there is anyone thinking the same as I was wondering (!) Yes - the Armanov quick change toolhead can be made to fit the Dillon RL1050 (even though they say it won't!) The only thing I had to do was slightly shorten one of the pins on the toolhead that keeps everything inline when the ram is raised. (The Dillon p/n is the same between presses, so not sure why the pin is longer on the Armanov.) If you use the 1050 ratchet, you need to fit the correct length part (I don't use it though.) Great addition if you already use the Hornady LnL stuff.

Bump

I’ll take this please. I’ll message you…

I have a Dillon RL1050 and use it as a sort of progressive! I run through brass to de-prime, size, swage and trim (with the Dillon trimmer mounted). Then I prime off press after the brass has been cleaned, then I load using the primed brass on the Dillon. I'm using RS52 powder and it meters ok through the Dillon powder dispenser - but I have polished internals of the powder hopper to help.

No - my own stuff

2x 1000 Magtech 9 1/2 Large Rifle Primers (1 Gone) 2x 1000 Magtech 1 1/2 Small Pistol Primers (Sold Pending) 4x 1000 Magtech 2 1/2 Large Pistol Primers (Sold Pending) 1x 1000 Henry Krank Large Pistol Primers All £85 /1000 collected from Chessington KT9 or Bisley Triggertech Remington 700 Primary - Stainless, Curved trigger, 1.5-4lbs, right hand with bolt release. New & still sealed in the box. £170 +post at cost if needed.

SSG69 green stock with butt pad, but not trigger guard assembly. Good overall condition - some scuffs, but no cracks. £200 posted