Andrew

And what kind of weather! That bottom group is pretty but is looks to be three and a half bullet widths wide. That would put it in the .7 region. Hard to tell from a photo. Nice shooting, regardless. The winds here don't allow that kind of grouping too often.~Andrew

A wise man once said, "If you're worried about wearing out your barrel, leave the damned thing in the cabinet!" With regard to the AR platform guns in the US, these seem to be used more for hunting than magazine dumping. Few people can afford that kind of extravagance. ~Andrew

Strange stuff. Lapua might be interested, you never know. Yes. Slicing a case would be very interesting. I hope you do. Andrew

I'll take it for granted it's not the decapping rod. What does the inside look like? I'd send that photo to Lapua.~Andrew

Maybe so. ~Andrew

Don't listen to these guys. If you want one in a bolt gun, get one. People tell me the same thing about the 6.5 Grendel. I shoot three bolt guns in Grendel. I don't shoot the ARC but considering its lineage it should be a good cartridge. Hornady factory ammo claims 2750 fps with a 105 grain bullet. Efficient and quick. Ballistically speaking, there doesn't look to be a spits worth of difference between the 6mm PPC and the ARC with bullets in that weight class. LIke I said, I don't shoot either but I'm guessing the accuracy potential is there. Get one and wring it out. JMHO~ Andrew

That goes without saying but skill is not what is on sale here. ~Andrew

He can say what he wants about the AMP, but he said right off that he used the Bench Source up until he bought the AMP. If he is an established champion shooter, who at least once shot 1.5 " at 1000 yards, he did it all using the Bench Source. That will be a hard fact to deconstruct while selling the virtues of the AMP. I've got the Bench Source. Works fine for me. With the difference in pricing between the two units I saved enough to buy a new rifle~ Andrew

One thing the 6.5CM and the 308 have in common: You don't need to work hard to make them shoot. ~Andrew

Be honest with your self: Will you be really shooting at 1250 regularly? Or just wanting to give it a pop once in a while? I have a 2100 yard range but seldom shoot more than 1200 and usually spend most of my time 800 to 1000 with about any rifle. It just seems a more practical course of fire. You may want to get something with a little more snort if you plan on 1250 regularly. Easiest option is a 300 WM with 208's. Those will reach easily.~ Andrew

Horrible, horrible grouping. You should get rid of that rifle. My address is....... Seriously. My TAC A1 had given me a group or two scaring the sub .3MOA mark but I figure with me behind the trigger, and shooting prone, that was still good. My TAC is frighteningly accurate with Nosler 140 Custom Competitions at around 2700 fps.~ Andrew

I shoot my 308 to 1000 using 175 grain bullets. I shoot 6,5 CM beyond that. I would never go with a 28" barrel on a 308. My rifle is 22 inches and does just fine with 168 and 175 grain bullets. When the weather is right, I can use 168's out to 1000 (3200 ft altitude and dry) but I would count on 175's as being a staple. One of the benefits of the 308 are lots of bullets available and command less price than 6,5's. Six-point five bullets are bringing a premium here in the States. In the end, your personal definition of "Long range" will make your decision for you. If that means 600 yards 90 % of the time, a 308 is your huckleberry. If its a steady diet of 1200-1500 yard, even the 6,5 CM won't keep your interest. ~Andrew

Fuze is a soft drink here. Fuse is how educated people spell it. ~Andrew

I can't wait for the next installment. ~Andrew

Yup.~ Andrew

They are coming back on the market. I've seen these with US on-line retailers recently. That said, there is no telling when they will hit your shores.~Andrew PS: I've used PPU with good success.

I contacted RCBS about a set of new 7.62x39 dies from which I do neat, uniform striations along the neck from the FL sizer. Looked like a purposefully applied crimp. I contacted them, sent photos of the cases, and 5 weeks later (after I'd purchased a new die set) their people contacted me to say that I was using the die incorrectly and that it needed cleaning. I stripped it an tossed it in the trash. Forty five years of using RCBS equipment over. ~Andrew

IT is odd, isn't it? I like the XD's, I have a XD Tactical 45ACP that outshoots my old Colt Gold Cup, and I have the XD 9mm Sub Compact for carrying -it is very accurate as well. Years back I got to test the XD Match in 45 ACP and 9mm. Both would shoot exceptionally well with the cheapest factory ammo. The $800 price tag was out of my league at the time. With this 9mm, I happened to be in the ranch supply store and spied this XD Match Elite Precision for just over $500 US. Two magazines of twenty one round capacity and a few different back straps, New in the Box. I couldn't pass it up. (I still think they mis priced it) comfortable and a superb trigger. My 135 grn handloads will shoot as well as I can hold. I have only put a coulpe of hundred rounds through it but I do love it. On a slightly different tack.... I purchased a Taurus TX 22 semi auto right after this XD. To say I am impressed with this 16 round Taurus is an understatement. I have dozens of handguns and this one is rapidly becoming my favorite rimfire auto. One of the most ergonomic grips I have experienced. Threaded for a suppressor from the factory, and 100% reliable with any numbers of ammunition. 17 ounce weight. Made in Taurus' plant in the US. If you ever get the chance to fire one, don't pass it by. ~Andrew

Just bought this one. Springfield Armory XD Match Elite Precision. The most accurate factory9mm's I've ever owned or shot ~Andrew

Barrels are relatively cheap and easily replaced. The suppressor is the pricey unit! I've watched this video a few times. Still can't fathom it.~Andrew

My question exactly. $1400 US suppressor and, at current market price, about $750 US in ammo. Must be nice.~Andrew

Not on the list, but close cousin, I bought the Tikka TACA1 in CM. I'm pretty tickled with it though I only use it prone on steel plates.~Andrew

Don't worry about the diatance from the lands. I have two Tikka T3 lites: one with a 1:8 twist, one with a 1:10. I load to data-specified OAL. Both shoot better than I can hold. Dont get caught up in the diatancer from the lands thing. Waste of time, really.~Andrew

I'm not sure that extra length will give substantial returns. 1000 yards is not too difficult with a 308 provided you are using a heavy bullet,(175) or a lighter bulet (168) when the environment is accomodating. You might struggle at sea level with 168's but I watched my girlfriend jangle a MOA steel plate at 1100 yards using Hornady 168 Match at 3200 ft/ASL on a dry day with a MV of 2649 fps. I warned her that on a different day, the results might have been frustratingly different. With my Ruger Precision 308 and 175 grain Noslers, loaded over a mil spec charge of IMR4064, a MOA plate at 1000 is only saved a beating by my inability to read the wind.~Andrew

308: Go to a 175 grain at about 2700 if you can get it. I use Nosler 175 Custom Competitions over IMR 4064 or Lovex 073-6~Andrew