lee w 118 Posted June 2, 2020 Report Share Posted June 2, 2020 Tidy mate 👍 Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 3, 2020 Author Report Share Posted June 3, 2020 So a couple of hours ago I went to confirm group at distance Set up a target at 942mtrs (random but thats what it was) and estimated wind (my Kestrel 4500 is dead) at 10 mph gusting slightly higher Set the target with a flat horizontal line (as per THLR recent videos) I dialed in date into AB program with estimated wind set up on atlad bipd and Ulfhednar rear bag First shot I was able to spot fall was slightly right, so added .3 MIL more wind on the scope, sending another four rounds down range. The results are I think pretty good. ~You can see four shots on target in a nice group This shows Ab program and data pretty accurate to less than .2 MIL trajectory (id call that good) Load ES is very stable too Group of four (at 942 MTRS) replicates data at 100 shot yesterday = (sub half MOA gun and load) These babies work just fine Quote Link to comment Share on other sites More sharing options...
trucraft Posted June 3, 2020 Report Share Posted June 3, 2020 Looking ace. That's great result.👍 Quote Link to comment Share on other sites More sharing options...
Elliott Posted June 3, 2020 Report Share Posted June 3, 2020 Nice job. That's some distance, too. Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 4, 2020 Author Report Share Posted June 4, 2020 Thanks guys Ran the four shot group through Ballistic X this morning - .37 MOA - 1030 Yds - not too shabby The finished rifle, in Precision Rifle Comp mode (I have shorter barrel set up for deer, thats works equally well) Quote Link to comment Share on other sites More sharing options...
lapua Posted June 4, 2020 Report Share Posted June 4, 2020 No excuses now then! Quote Link to comment Share on other sites More sharing options...
srvet Posted June 4, 2020 Report Share Posted June 4, 2020 1 hour ago, lapua said: No excuses now then! Ha ha that’s so true!! By the time we all perfect our gear there is only one weak link left in the chain 😂😂. A great result indeed Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 4, 2020 Author Report Share Posted June 4, 2020 Any mistakes will most defiantly be down to me Quote Link to comment Share on other sites More sharing options...
Scooby-93 Posted June 4, 2020 Report Share Posted June 4, 2020 What charge did you settle on Andy? Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 4, 2020 Author Report Share Posted June 4, 2020 Relatively mild charge of RS 60 bobbing along circa 2900 FPS Es v low Very efficient case when improved Quote Link to comment Share on other sites More sharing options...
No i deer Posted June 4, 2020 Report Share Posted June 4, 2020 Nice Andy 👍 Quote Link to comment Share on other sites More sharing options...
Scooby-93 Posted June 5, 2020 Report Share Posted June 5, 2020 15 hours ago, Ronin said: Relatively mild charge of RS 60 bobbing along circa 2900 FPS Es v low Very efficient case when improved Is there a reason you chose to run that powder over the likes of RS62 or even N160 / n165? I get very similar speed to you using N160 with 147eld Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 5, 2020 Author Report Share Posted June 5, 2020 Accuracy / VO was not as good with 160:165 when I tested earlier in the year I don’t have any 62 to try I’m aware that 60 may prove to be a barrel killer but the barrel is likely to have a hard life anyway it’s semantics - if (when CV19 restrictions allow) we return to competitive shooting it will be fine for 12 months competition and replace . (If it’s as hard as that ) Are you using improved case too ? Quote Link to comment Share on other sites More sharing options...
Scooby-93 Posted June 5, 2020 Report Share Posted June 5, 2020 1 hour ago, Ronin said: Accuracy / VO was not as good with 160:165 when I tested earlier in the year I don’t have any 62 to try I’m aware that 60 may prove to be a barrel killer but the barrel is likely to have a hard life anyway it’s semantics - if (when CV19 restrictions allow) we return to competitive shooting it will be fine for 12 months competition and replace . (If it’s as hard as that ) Are you using improved case too ? That’s interesting to hear, it will be good to find out how the barrel copes with the rs60 especially in competition use etc. no it’s a 6.5CM in SRP brass 44.7gr Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 5, 2020 Author Report Share Posted June 5, 2020 Ah, I see, that’s a stiff load for CM to attain similar VO as the Improved 260 - I’m using less powder than that - quite a bit less The improved case seems to be quite efficient Quote Link to comment Share on other sites More sharing options...
Scooby-93 Posted June 5, 2020 Report Share Posted June 5, 2020 It was worked up to 46 grain before experiencing pressure that was just shy of 3000fps I run 28” barrel. That’s been the key to my high velocity I would think. it certainly sounds it Andy, how long a barrel are you running? Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 5, 2020 Author Report Share Posted June 5, 2020 It’s 26 Bartlein 7 twist My reason for using lower powder charge is to enable use in all Uk conditions - didnt want it too warm in our sunny climate 😂 Quote Link to comment Share on other sites More sharing options...
Scooby-93 Posted June 5, 2020 Report Share Posted June 5, 2020 40 minutes ago, Ronin said: It’s 26 Bartlein 7 twist My reason for using lower powder charge is to enable use in all Uk conditions - didnt want it too warm in our sunny climate 😂 😂 very true! From 22degree 2 days ago to 6 today Quote Link to comment Share on other sites More sharing options...
No i deer Posted June 5, 2020 Report Share Posted June 5, 2020 Too cold for shorts on now 😨. Quote Link to comment Share on other sites More sharing options...
Scooby-93 Posted June 5, 2020 Report Share Posted June 5, 2020 Thermal shorts Quote Link to comment Share on other sites More sharing options...
takbok Posted June 5, 2020 Report Share Posted June 5, 2020 Very interesting mousetrap. Thanks Ronin Quote Link to comment Share on other sites More sharing options...
DW58 Posted June 9, 2020 Report Share Posted June 9, 2020 On 2/17/2020 at 9:03 PM, Ronin said: Dave, yes it is unique here in the UK, but commonly used in this guise in Skandinavia (maybe not in 260 ) Ive really just followed a rested route that’s been followed over there that works Been fun making it though 😃 Not unique in the UK ... ... ... we must have taken delivery around the same time. I too am delighted with the Vision chassis, I currently have just the factory .308 barrel, but ordered a second in 6mm Creedmoor today. Quote Link to comment Share on other sites More sharing options...
Ronin Posted June 9, 2020 Author Report Share Posted June 9, 2020 Superb - two of us seen the way forward then 😀 Truly a very versatile chassis and rifle action if you can think outside the box Yet to be tested in Comp conditions here (though entered a Comp in July ) but they seem to do quite well in Scandinavia Glad you managed to get yours too without much trouble, I found the process trouble free and an easy company to deal with. Quote Link to comment Share on other sites More sharing options...
JBirchall Posted June 9, 2020 Report Share Posted June 9, 2020 Brilliant results and using the good old SMKs. Great post and update. Quote Link to comment Share on other sites More sharing options...
terryh Posted June 9, 2020 Report Share Posted June 9, 2020 Tidy looking rifle Botasky 😎😉 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.