Adamdavi3s Posted February 24, 2016 Report Share Posted February 24, 2016 Hi All,Not sure if this is useful to anyone or not but these are my MKii turret wraps (MKi were an excel botch)I took my inspiration from here, with the hope of making them easier to produce:http://ukvarminting.com/forums/topic/14963-bullet-drop-charts-for-sightron/ File Library If you do make some, please do share the QCAD file as it might help out others with the same scope. (PM me and I can upload it to my hosting if necessary) You can obviously just take the base measurements and build your ballistic data on top. .223 on Sightron 8-32x56 1/8th http://www.duckboy.co.uk/randompics/scope_wrap/223_horizontal_turret.dxf 155 AMAX @ 2711fps Nightforce NXS 1/4MOA click, 10 MOA per turn http://www.duckboy.co.uk/randompics/scope_wrap/NSX_turret2.dxf Courtesy of @Otisthedog Other optionsFurther down in the thread people have started to add their own options for creating these. I've not tested them out but in the interest of knowledge sharing here they are:Adobe Illustrator http://ukvarminting.com/forums/topic/24533-turret-labels/page-3?hl=%20turret%20%20wrapsAn online tool (Similar to what we hoped to create) http://www.leonsoft.it/customturrets/I tried excel at first (I use it a lot for work) but it just isn't a precise enough tool for this.In the end I used the free tool QCad, now I've got the learning curve out the way these can be made relatively quickly.These print directly and exactly, no faffing with printing percentages or anything, I just popped these out on my inkjetDefinitely some finessing to do with them, I also need to create a colour wrap for the actual turret to make it clear which range colour I am reading.These are for my .223 on my sightron with 1/8th turrets but I've not double checked the figures yet as I wanted to prove the concept.Sorry not the best images Tim's NSX (link above) Ok so I have started to write it up but screenshots take ages!Measuring upTurretFirst thing is to figure out the circumference of your scope turret.You can do a couple of things, least technical is cut a bit of paper, wrap it around your turret, mark it off and measure.The method I used was to use calipers to measure the diameter then multiply by pi (mmm pie) or do it in Google.For my Sightron this gave me a nice round 80mmNext count the clicks, my turret has 80 clicks per revolution which very helpfully makes each click 1mmAlso a useful measurement is the height of the area you want to stick the wrap to so you know what space you have to work with Diameter = 25.477 Pie = 3.14 Clicks = 80 25.477 * 3.14 = 79.99 so I rounded to 80mm for the diameter 80mm / 80 clicks = 1mm per click Decide what you want!This might be an obvious step, but QCad isnt the most user friendly tool and re-working can be a bit of a pain!This is what my mark-ii look like, but I will be tweaking this a bit I think, I should have thought it through a bit moreIf you want to pilfer this turret the qcad file is here:http://www.duckboy.co.uk/randompics/scope_wrap/223_horizontal_turret.dxfQcadhttp://www.qcad.org/en/qcad-downloads-trialSetting UpQcad is a bit daunting to start with, but in reality were going to use about 1/10000th of what is in here.If the grid isnt showing, go to: view > grid and it should showNow go to Snap > Grid nothing will happen but if you go back to the snap menu, grid should be highlighted.Finally lets set the grid up to match your click distance which makes life a LOT easier. Go to Edit > Drawing Preferences (Make sure it is drawing and not application) and then click Grid. Alter the X & Y settings for viewport 1 as below for example (in my example it should be 1mm this is just an example):By now youve probably had this error message, but that is ok you can just OK it and crack on for now:NOTE ABOUT COLOURS There is an additional section added below about adding a coloured background, you can do this first if you want which might make life easierSetting upLets set up out working area.First step is the base line, this should be the circumference of your turret.Use the line tool by clicking on these:Click somewhere on the grid to start the line (it doesnt matter where right now)Then click somewhere else to end the line (again anywhere), at this point you want to hit esc on your keyboard so you dont end up with this:You should end up with this:Now do the same and make a vertical line- this will be your measure for the height so you know your working area. Hopefully you now have something that looks like this.Once you are done then you need to deactivate the line tool, click the arrow icon just below the File menuThe next bit is a little bit tricky, but it is good get used to the manual way of working as it is a lot more exact than dragging and drawing.Select the horizontal line by clicking on it, it should go red. Then look at the Property Editor box on the right hand side.We will set this line to be in position 0,0 (to make life easier) and we will set the length to be the circumference of the scope turret.For example this is the before and after:Set the start to 0,0 and the end to 80,0 (80 being the circumference)I did the same for my height line, and put it off to the right a bit (as we dont actually want it for printing). My turret has 15mm of space to stick the tapeSo I now have something which looks like this:The final adjustment you can make is to make the line a little thinner, this is done in the same box:Adding the Detail Note that if anytime you need to get closer, use the View > Zoom functions which are in the menu. Then use the scroll bars to re-centre the window.Now it is time to add the bits and pieces, firstly we will add our hash marks.Lets break out the line tool again and make one hash mark.Clicking on the far left grid point to start the line, then on the point above it and then hot esc on the keyboard to finish. Hopefully you now have a nice fat vertical line:Select the line and then use the property editor to set the lineweight to be a little smaller, I used 0.05mm for my hashesCopying this 79 timesWe need 79 more hashes so lets make it easy.With the line selected (it should be red) copy it using ctrl+c or edit > copy then paste it again straight away using ctrl+v or edit>paste then when you move the mouse you will have a new line you can place.This is where I have found Qcad to be a bit annoying (I am sure there is a way around it) but it grabs the middle of the line which you can then snap to grid.So if you move the line one grid to the right and slight up, it should pop up and say grid, at which point you can click the mouse and it will place the lineWhere Qcad is helpful is that it keeps pasting until you click escape, so keep clicking and pasting lines until you have filled the strip, however note than you dont need one on the other end, as this is where the paper will join upAt some point you might have to use the scroll bars to move around, just do it, you dont need to deselect or anything, move the scroll and then go back to clicking to paste.Once done, zoom out a bit so you can see the whole thingBeautiful.Firstly congratulations if you have made it this far without getting bored or lobbing the computer across the room.Next step is to lower these additional lines down so they sit nicely on our baseline (or leave them here if you like them floating!)Do a click + drag and draw the square out over all the lines so that they are selectedThen just adjust the Y figures in the properties box to shift them downAnd hey presto, you have a beautiful scale!Printing the fileAt this point I would suggest printing this out and making sure that it matches up with your scale.To do this we need to exit the program and reopen it to re activate the pro tools. So, save the project File > Save as (ignore the warning) then close the program and re-open it again.Now, you can click the little icon which says svg on the toolbar, just under Dimension and then save the file somewhere, the desktop is always a good bet.Now, you can open this file in internet explorer and then just print it as you would anything else.Making it workRight, then it just comes down to making things how you want them, Ill go through a couple of bits here as an example, but really it is all just using the properties box to change line heights and colours, then adding text.Lets add a zero pointPick a hash mark roughly ½ way along, I suggest this because you dont want a major unit on the join line, and also you want the join to be opposite the 0 on the turret so youre not staring at it the whole time.Then use the properties box to make it a bit fatter and also a different colour if you like:Here is my slightly fatter red lineAdding TextUse the text tool to open up the text entry boxThis pops open the text entry box, note the two areas I have circled as this lets you adjust the size and also the colour. The size box you can directly type in if you need some in-between sizes, for example 1 is select-able, 1.5 is select-able but if you want 1.2 you have to type it in to the box.When you hit the OK button, then it will take you back to the grid where you can then click to place the text.If you need to edit the text at any point, you can just double click it and the text box will re-open.If you then want to add back your original scale, its just a case of counting the hashes/clicks and making the lines bold and adding text, you can copy the text or add new text. With the snap to grid on, it can be a bit of a pain to line the text up so you can turn the snap to grid off, or use the properties to make adjustments to the x and y values to move itAdding range markingsI used the iOS app, Sako Ballistics and also the Hawke BRC app to generate and double check the clicks per range adjustment required for my particular rounds.This is the table for my .223 roundSo for my 150 yard range marking, I just count five clicks from 0 and then lengthen the line and make it green for example.Now this time when you add the text (using the text tool) you can use the angle box to rotate the text before you place itBasically just repeat and continue to build the wrap up with the ranges for your round. As requested- changing the background colour (line colours are just changed by selecting them all and changing the drop down as we learned above) 1- Draw a square 2- 'hash' it with a solid colour 3- change the colour 4- change the draw order to make it a background Click this button Click this button in the sub menu As we learned before, click once to start the shape, then drag it out to where you want and click to finish the shape. I just made a square which covered my whole area and then some. Once you have the square selected click on the 'hash' button Just OK this box finally click on the solid square to select it, change the colour to the one you want, and set the draw order to a negative number you should end up with something beautiful like this Printing the fileAt this point I would suggest printing this out and making sure that it matches up with your scale.To do this we need to exit the program and reopen it to re activate the pro tools. So, save the project File > Save as (ignore the warning) then close the program and re-open it again.Now, you can click the little icon which says svg on the toolbar, just under Dimension and then save the file somewhere, the desktop is always a good bet.Now, you can open this file in internet explorer and then just print it as you would anything else.Arts and CraftsThe final step in the puzzle is to protect the wrap and stick it on the turret.Trim the wrap out and then laminate it. I used Scotch Magic Tape as its goes clear and wont yellow. Plus being a bit stiffer it gives the wrap a nice laminated looks.I stuck magic tape on both sides of the wrap then trimmed it aroundThen I stuck another piece of tape over the front, and trimmed the top and bottom but not the sidesThen I stuck one side down to the turret, pulled the wrap tight and stuck the other edge, job done! Link to comment Share on other sites More sharing options...
Akeld Posted February 24, 2016 Report Share Posted February 24, 2016 Looks very good, I'd be interested in the step by step process Link to comment Share on other sites More sharing options...
Deserttech Europe Posted February 24, 2016 Report Share Posted February 24, 2016 I would also be very interested. Ewen Link to comment Share on other sites More sharing options...
bradders Posted February 24, 2016 Report Share Posted February 24, 2016 I wouldn't know where to start making something like those Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 24, 2016 Author Report Share Posted February 24, 2016 i've started writing it up! Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 25, 2016 Author Report Share Posted February 25, 2016 and done.... Link to comment Share on other sites More sharing options...
trucraft Posted February 25, 2016 Report Share Posted February 25, 2016 Wow that's just blown my mind, it looks so complicated. Excellent job though and well done for taking the time to post it. Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 26, 2016 Author Report Share Posted February 26, 2016 Honestly once you get into it, it's really not that bad at all! It's just getting used to it, but then It's all just copying and pasting and moving things around! Link to comment Share on other sites More sharing options...
Dustyman Posted February 26, 2016 Report Share Posted February 26, 2016 I e got some templates for pm11 in cad format if people want them to play with as well Link to comment Share on other sites More sharing options...
banus02 Posted February 26, 2016 Report Share Posted February 26, 2016 good morning,does anyone fancy making some for ukv members,i would love some but there is no way I could follow the instructions on a computer Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 26, 2016 Author Report Share Posted February 26, 2016 I wish that I had the time to do it for people but unfortunately I just don't at the moment. I might see if I can write a program to create them as I think I might be able to build something on top of qcad, but it will probably take me a fair while to figure it out! However as people create them then I'm happy to host them and add links to the thread so other people can download them! Link to comment Share on other sites More sharing options...
The_Dogge Posted February 26, 2016 Report Share Posted February 26, 2016 I like that a lot, thanks for writing it up, I get acceptable results with the excel fiddle method, but they don't look as good as that. If I could make one suggestion, the range from the ballistic app is going to be a rounded approximation to the click value, as it is calculated for the range and rounded to the click. When I did it I changed my ballistic software to give an exact range to a click value. The clicks are the fixed discrete quantity you can't change, the range at which they are correct is continuously variable. It doesn't look as "neat" on the wrap as the ranges are not round numbers, but they are as accurate as they can be, and you can have one for every click. This is not easy to do using a ballistic app, I used my own spreadsheet based ballistic software. I think it is on this forum to download somewhere, but that version does have a known bug at transonic velocities, and doesn't have the extra feature to derive range from drop in MoA. Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 26, 2016 Author Report Share Posted February 26, 2016 Thanks, yeah my excel fiddle was OK and useable but no where near as precise or clear to read, hence why I wanted to strive for something more! Completely agree, and I like that idea! At the moment this was just a proof of concept idea to see how it looked on the turret and make sure I could get it to match up with the hash markings etc. There is definetely a lot more which can be done and there is plenty of room on the elevation turret to add more detail, given our climate I'm thinking of adding additional data for temperature and/or head/tail wind, but that comes under my 'think about what you want' section! Link to comment Share on other sites More sharing options...
Grouse Posted February 26, 2016 Report Share Posted February 26, 2016 Thanks for that, next wet day??? Link to comment Share on other sites More sharing options...
CZ Varminter Posted February 27, 2016 Report Share Posted February 27, 2016 I'd be interested mate. Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 27, 2016 Author Report Share Posted February 27, 2016 wow I've just looked at these on my PC and the screenshots are massive, sorry! looks OK on my phone, i will shrink them I am meeting my brother tomorrow who is a better programmer than i so we'll see what we can come up with between us Link to comment Share on other sites More sharing options...
chaz Posted February 27, 2016 Report Share Posted February 27, 2016 good morning,does anyone fancy making some for ukv members,i would love some but there is no way I could follow the instructions on a computer +1. I'm happy to pay to have these made. I did try to contact Oaken to make some as part of the funds go to "Help for Heroes", but I never got a reply... Link to comment Share on other sites More sharing options...
pengo Posted February 27, 2016 Report Share Posted February 27, 2016 +1. I'm happy to pay to have these made. I did try to contact Oaken to make some as part of the funds go to "Help for Heroes", but I never got a reply... +2 on that one. I'm quite a Luddite when it comes to technology, so I'd also be happy to pay to have these made. It would make my life so much easier.... Just my thoughts. Cheers. Paul Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 27, 2016 Author Report Share Posted February 27, 2016 Okie dokie, let me see what we can come up with tomorrow :-) Might not be possible to automate but will let you all know Link to comment Share on other sites More sharing options...
hunter686 Posted February 27, 2016 Report Share Posted February 27, 2016 Stickie! Link to comment Share on other sites More sharing options...
sako 243 Posted February 27, 2016 Report Share Posted February 27, 2016 happy to pay to have these made two, scope is pm11. Thanks Terry. Link to comment Share on other sites More sharing options...
Adamdavi3s Posted February 27, 2016 Author Report Share Posted February 27, 2016 Working on something so bear with us. Trying to figure out how to make it straightforward but will some customisable options Will be open source, so no cost but will likely have a donate button for help for heroes or something Link to comment Share on other sites More sharing options...
trazman Posted March 1, 2016 Report Share Posted March 1, 2016 There is also an easier option: http://eu-lrh.com/forum/viewtopic.php?f=15&t=251 Link to comment Share on other sites More sharing options...
Adamdavi3s Posted March 1, 2016 Author Report Share Posted March 1, 2016 Brill! Didn't know that existed, that looks like that we were looking to do. I'll look at it later on, if it produces a scaled svg then job done! Link to comment Share on other sites More sharing options...
tisme Posted March 1, 2016 Report Share Posted March 1, 2016 You don't need a special program I made mine in Adobe Illustrator http://ukvarminting.com/forums/topic/24533-turret-labels/page-3?hl=%20turret%20%20wraps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.