No i deer

Here's the 162gr eldx's.3 shot group

Checked the load about a month ago.

I run my 284 on 162gr eldx's for hunting on 54.8grs of N160.. 2900fps plus My chamber was cut by Neil Mckillop for 160 to 180gr bullets i believe.. 2560 shots down the barrel and still shooting superbly. They're very accurate indeed and expand as you would like.

Why are you adjusting them..? Have you changed presses..? Replace them with forster lock rings as already said

There will be alot of disappointed people now..

Twelve thousandths neck wall is fine.. neckwall thickness really depends on what size the tight necked reamer cuts the chamber neck. .307 bushing will be just fine.. personally I'd use a .306 bushing Bushing down an extra 1 thousandths will work well for running it over a 1.5 thousandths neck tensions mandrel.. I run the mandrel through the case twice.

Norman Clark has got some primers apparently..? Selling 1000 per person I think 🤔

Yes very good

I have a tuner on my latest 7mm saum barrel.. It's a Dan Bramley tuner.. My very first tuner.. I did the load development the usual way that went very well and I'm yet to try out the tuner.. This was October 2022 and I haven't put the barrel back on yet. The 7mm 270 is still shooting great so I've no urge to swap the barrels around. I watched the yanks at the European championships adjusting their tuners to adjust the positive compensation. They seem to be confident adjusting them..

I watched an f class John video where he ran the loads that were more and more out of alignment testing the concentricity theory.. They had to be really bent to be really bad on the target.. Small amounts of variation didn't make much difference on the target..

What did you gain from watching the video pops..?

When i bought my last batch I got the lot that was 1064fps so not to get any crackers.. There was some tenex with 1086fps but I didnt want the fast stuff.. It seems to prefer sub 1060fps anyway.. Personally I've never bothered to chrony 22lr ammo but I do follow what others post.

What was the velocity showing on the box of the eley match

Oooops.. I didn't look at that only the groups 🤣. Shoots lovely

What rifle..?

I think some of you on here were interested.

https://www.facebook.com/groups/598235463529577/permalink/7346554405364282/

I don't think so.. They were shot on the 18th of December showing near the beginning of this page.. CZ452's aren't renowned for accuracy but I have found with the right lot of ammo can shoot like a custom gun which seem to be more accommodating with ammo in general unlike a hammer forged barrel

Here's my attempt at a 50yds 5 shot group again with the latest lot of eley match.. Prone bipod and been bag across the fields. There was a a breeze.. Just couldnt get it to shoot better.. It's shot that same lot better a few weeks ago.

Wise decision 🎅

The small base die is a good investment with a 284 when the brass has had quite a few firings.. I run mine through the SBD every firing now. At NID

Withdrawn.. I'll try a few more seating depths 🎅

Hi Alan.. What are you using this powder in.. I was thinking of trying some in my 7mm 270 as it's the same burn rate as H1000 and I'm running out

I'd like it myself but I don't need it 🎅

Both 5 shot groups at 50yds on the recent lot of eley match . CZ452 varmint