No i deer

It was in the AT style

Roedale made one.. Aw I think. They used to come up for sell on here occasionally.. Not seen one for a couple of years

The hog is out there now.. Just put some wet dog food next to it 😊

My wife saw 2 little hogs in our garden wedneday evening 🦔🦔

I am privileged to have hedgehogs in my garden.. seen the adult several times lately. Tonite again a very small one is out there.. My dog let's us know..

I've got 2 unopened boxes and one box with 15 bullets in. £95 per box including postage Have both boxes and the 15 for free

I use 162gr eldx's in my 284.. There fantastic

Accuracy can be really good.. I've blown up half a dozen 7mm 180s. Some in my saum f open rifle and some in my 26 inch stalking snapshooting rifle.. I know some who's used the 208's in 30 cal in there 300wsm and never had a problem.. The 6.5 cal 147gr eldms can blow up too.

Nice

Sold

That's a beauty for the lucky new owner 😊

😵‍💫

Look at Joe West rifle stocks.. His f class stocks are very popular. Come to Bisley next week to the European championships and you'll see every type of f class stock, f open and ftr. Some of the top US shooters like Erik Cortina,Tod Hendicks,Norman Harrold just to mention a few will be there.

I have heard of shim stock as a fellow f class mate used it to help size his 300wsm brass on the widest part of the case as his brass wasn't chambering.. His small based die had split again and didn't wanna buy more brass. He's since got a beefed up small base die off fox firearms that cured the problem. All his brass was useable again. I had a similar problem with my well used 284 brass.. Bolt lift after firing was a little sticky. I knew it wasn't the load.. I small based die cured it. Worked like a dream after

Ah I see.. Thanks pops 👍

Show me these shims etc pops 👍

👍

I had issues once with a 6.5x47 forster fl die.. It was skimming brass off the necks.. I had alot of messing around and resizing.. It was exchanged for another set.. Resized everything again and the replacement had a 7mm expander ball in it.. I didn't know this until I'd resized 200 cases again. I went to seat bullets and they would slip down inside.. I thought wtf.. Made another call.. I had to take the die apart and measure the expander ball. This die went back and another one was sent out.. In the meanwhile the topman at forster rang me and apologised and sent me a micrometer seater to go on my die.. I thought that was a very nice gesture.. I had the new die come and had to do the whole 200 again and they were finally right 😅. Personally I think forster is a good product.. The micrometer doesn't adjust as accurate and my redding bushing dies.. Move it 1 thousandths and it seats another 1 thousandths.. I've not used L E Wilson stuff.. Buy the best quality you can afford..

I use eley match and I stumbled on a lot that absolutely hammered in my 22lr. Unfortunately there all gone now.. Recently shot a couple of tidy 5 shot groups at 50yds. All the good lot are gone now 😪

3 shot group. Pursuit of accuracy is really good.. I've watched most of his stuff and fully recommended watching it. Top photo was the 1 inch group.. Bottom was another 200yds 5 shot group on my hardox target. Used a 9 mag leupold rimfire moa scope

Tidy enough.. Makes you wonder how accurate Josh's rifles are on the pursuit of accuracy when he shoots the KYL target at 100yds and he's cleaned it being the smallest target is 1/4 of an inch.. I think I've seen him clean it at 150yds off his bench set up. He's hitting small target out to about 200yds. Quite impressive..!! I've had one group of an inch at 200yds.. The times after I tried were double the size and worse 🙃

Hi Ewen. It's a mystic bipod

PM'd you 👍

A mate might be interested in these. He didn't think they could be bought in boxes of 1000 count in 338 .. He's ask for a photo to be put on the advert 👍