baldie Posted February 1, 2020 Report Share Posted February 1, 2020 January is usually a quieter month. Never had one as busy as this year, absolutely mental. 3 different guns being finished for the purpose of PRL. This is about as "purpose built" as it gets. The action is a Defiance Deviant Elite. Chosen for some of its not immediately apparent qualities. Its a controlled round feed action, which is a failsafe way of loading[ and not jamming ] a rifle, but it also has a coned breech face/bolt head. That ensure a round can be thrown in the breech, and the bolt slammed shut....every time. Pretty vital on a PRL gun. Everyone carries a 2 round holder on the side of their rifles, and you usually need it at some point in the day. The case it ejected at the speed you choose, by a mechanical sprung ejector, in the rear of the action. Work the bolt hard, they go into the next field. Or do it slowly, and just tip them out the side. This is also why the bolt is unfluted. The action is DLC coated, and as slick as a greased weasel. The recoil lug is fixed mid way down the action to give rem footprint. It does however have an absolutely huge tenon length of 1.8" ! That is always going to give a very rigid set up, especially with a monster barrel like this one. The barrel itself, is a Bartlien heavy varmint, at 24" of bore. Cerakoted satin black to match the action, and muzzle threaded M18 x 1 and invisible capped. It also has a self indexing 3 port brake. Trigger is a 2 stage, straight bladed Timney Calvin Elite. Onto the stock. This is the MDT ACC stock, again, basically designed for PRL. It has a full length ARCA rail, and also a barricade stop at the front of the mag well. It also has the facility to add weights all the way down the fore end to get balance where needed, or to take the gun up to maximum wight, which is what the new owner intends to do. The calibre is 6XC and will be pretty much free recoiling with a weight of around 26lb when all kitted up, and the brake. All designed to give a first round, if missed, spottable at range , by the shooter. A very purposeful gun, this. It is one of them, that just instantly feels "right" and i suspect, will be a real hammer. Definitely one of the guns/shooters to watch next season. Quote Link to comment Share on other sites More sharing options...
jcampbellsmith Posted February 1, 2020 Report Share Posted February 1, 2020 Very nice, it has a familiar look to it. Best regards JCS Quote Link to comment Share on other sites More sharing options...
Scotch_egg Posted February 1, 2020 Report Share Posted February 1, 2020 Lovely looking rifle. what make brake is it? Quote Link to comment Share on other sites More sharing options...
baldie Posted February 1, 2020 Author Report Share Posted February 1, 2020 Cant remember Dave, but it came from Paddy, as did the action, and thanks to him.😊 Well designed, follows the usual port layouts, but has the active baffle gas divergers as my own brakes do. The nut is clever, its on a left hand thread so doesn't come undone. Quote Link to comment Share on other sites More sharing options...
terryh Posted February 2, 2020 Report Share Posted February 2, 2020 Nice rifle Dave - but 26 pounds 😯 gosh Quote Link to comment Share on other sites More sharing options...
baldie Posted February 12, 2020 Author Report Share Posted February 12, 2020 The customer sent some very nice pics through. Last pic is of initial group during breaking in. I don't think its going to need much in the way of load development. Having seen video of it being fired, i can confirm, it has the recoil, of a rimfire. Quote Link to comment Share on other sites More sharing options...
Charlts Posted February 12, 2020 Report Share Posted February 12, 2020 It’s a stunner Dave, having shot it there’s zero recoil and it’s more accurate than it looks! Great job mucker. Quote Link to comment Share on other sites More sharing options...
Shendy Posted February 12, 2020 Report Share Posted February 12, 2020 Where did Alex get the quiver from? looking good all together, def one to watch in this years PRL. Quote Link to comment Share on other sites More sharing options...
johnnyb0_1 Posted February 17, 2020 Report Share Posted February 17, 2020 Looks like a Hoptic USA quiver. They make several models and calibers. They will send to the UK. Cheers, JP. Quote Link to comment Share on other sites More sharing options...
Shendy Posted February 18, 2020 Report Share Posted February 18, 2020 9 hours ago, johnnyb0_1 said: Looks like a Hoptic USA quiver. They make several models and calibers. They will send to the UK. Cheers, JP. Ive tried to order and sent them a message still waiting on a response 2 weeks later Quote Link to comment Share on other sites More sharing options...
RAW Posted March 14, 2020 Report Share Posted March 14, 2020 Very nice! Quote Link to comment Share on other sites More sharing options...
MarinePMI Posted April 1, 2020 Report Share Posted April 1, 2020 On 2/18/2020 at 12:52 AM, Shendy said: Ive tried to order and sent them a message still waiting on a response 2 weeks later Did you get this sorted? Quote Link to comment Share on other sites More sharing options...
Shendy Posted April 1, 2020 Report Share Posted April 1, 2020 2 minutes ago, MarinePMI said: Did you get this sorted? No still not has a responce. Quote Link to comment Share on other sites More sharing options...
baldie Posted October 11, 2020 Author Report Share Posted October 11, 2020 Well done on yesterdays PRL win , with this fella Alex. 😎 Proud of you mate. Quote Link to comment Share on other sites More sharing options...
lambsey Posted February 27, 2021 Report Share Posted February 27, 2021 Very Nice looking rifle Quote Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.