John MH

Not for F Class

Anyone use one of these? https://www.alacritasinnovations.com/thumb-rest-trainer/fortis-micro-adjustable-rear-rest?fbclid=IwAR0W9sczUGILvEM4Vz0BSzfEQXVXPWfGYY92nypnhUFE4o8gXwchIYr0Xyw Thoughts?

Don’t mount yours to your gun then.

Please see pm wrt FW Arms Decapper.

Sold pending usual.

I'll take the Area 419 Die Ring Multi-Packs-419-zero-7/8ring please.

Selling as I have a Garmin Xero. Magnetospeed V3 in Soft Case with MK Machine Attachment that allows 'off barrel' attachment to rifle with or without Sound Moderator or Muzzle Brake. The Display Unit is attached to a Clamp that allows it to be attached to a Picatinny Rail if required. The Carbon Fibre Rod is too long to be posted but can be delivered to Bisley. £200 plus postage.

4.55"

Should be as bout 3100 FPS

All set for the 1 Mile Challenge on Bodmin Moor (unfortunately postponed due to fog): 33XC Peterson Brass, Warner 285 Flatline, Fed 215 Primer, 120 Grains of RS 80. Praesidia 120 Round Bullet Wallet with Magnum Loops

I would doubt Garmin would provide world wide cover for the products no matter where they were bought. You might not be covered by UK Consumer Law for products not purchased in the UK but why risk damage to Brand reputation, especially in the modern world of Social Media, by not providing worldwide warranty. I would suspect its a rouse by UK importers and prospective retailers to put people off from purchasing from elsewhere (yet they cannot currently supply the product). You may have to send your Xero C1 to a Garmin Service Centre as I suspect if you took it to a Garmin Retailer in the UK they would probably not be very helpful. Not different to buying a Garmin GPS abroad http://www.gpsinformation.net/main/garwarranty.htm

No, I did not speak to them but they have changed their website software and as a result there are no shipping options outside of the USA for that product.

I got one from Area 419 but they will no longer, at Garmin’s request, ship the Xero to the UK

Heard a rumour that Garmin have asked Dealers there that the Xero C1 Pro not be exported from the Continental USA, just confirmed on Area 419 website that there are 'no shipping options' available for the Xero C1 Pro for a UK address.

Shooting 33XC yet?

Might be worth doing.

My take away was that if you want a tuner get one, if you believe it is contributing to a reduction in group size then that's great and that belief will boost your confidence in your equipment and ammunition; all good positive factors in your mental preparation for a match. Statistical sample size was clearly emphasised and trying to claim a provable benefit from a single 3 or 5 round group must be taken with a pinch of salt; they (the Hornady Ballistician) used nearly 1000 rounds in their tests and his conclusion was that a turner adjustments had negligible effects on group dispersion. The retired Ballistician said he had run nearly 30000 simulations (of lots of factors) and found that the small displacement of mass by adjusting a Tuner a a small amount at the end of a barrel had negligible effect on predicted group dispersion. I have a Tuners on a couple of barrels and I am not convinced that they make a difference in the very limited testing I have done, but limited testing produces limited results.

Having used both .338 and 6mm Bullets with Noserings with very good results I thought I'd give this a try. Came with a full set of Collars, .22, 6mm, .25, 6.5mm, 7mm, .30 and .33

Not a UKPSA members since before the Pistol Ban, lots of shenanigins about 12 years ago and disputes between the NRA and Four4islands but it looks like they, the UKPSA, are still??

I might give this ago with my 33XC.

Can you please put your Location in your Profile as per the rules.

Do you do one for a Anschutz 1710?

They are 5.56mm NATO not .223 Rem and the flash holes on those are drilled not punched so they should not need to be deburred on the inside, good brass though.

Too early to say for me but I have both so can compare, plan at the weekend is to set up for .223, followed by 6XC, 33XC & 300NM.

Arrived, mounted on an Inline Fabrications Quick Change Mount, I'm keeping my Forster Co-Ax. Die set up at the weekend for 6XC, .223, 300NM and 33XC.