Gandy

https://www.instagram.com/p/CKtWud6BRh4/?utm_source=ig_web_copy_link This was just sent to me which would start to potentially explain animosity. Seems a funny going on.

Could not have put it better myself.

I’ve found it accurate and quite I that I’ve with some good tools for load development such as displaying the load increments and predicted pressures. Seems quite intuitive to use. I’ve no idea on the backup provided though.

Here is the weblink: https://www.grtools.de/

I’ve been using a free product called Gordon’s reloading tool as I didn’t want to pay for quick load again and have found it very good.

I’ve liked the look of these too.

Done.

I see very impressive then, you must be very pleased.

Very impressive; we’re there any obvious accuracy nodes as you would normally see?

Lovely but only £1 per bullet made me twitch.

Good shout.

Hard to answer depending on what you want to achieve when you shoot. I think you will get similar or slightly improved results from the brass from when it was factory loaded. If you want to improve results further brass prep will be involved. if you want to do less brass prep but want the best accuracy shiney new brass will be needed. I use shiney new brass in a accurate rifle used to compete and cheap brass in a hunting rifle where ranges are shorter and don’t need things to be perfect. Hope this helps.

Wow got to be pleased with that!!

Sold.

Sold pending funds.

BTT will accept offers this needs to go.

Noted.

Sold pending funds.

For those who have asked the two rods joined are 20in long and i have placed an overall photos with a 30in tape against the setup. I've no idea why but the photos are also upside down?

As above for sale and includes the powder baffle £65 + postage.

For sale as per the title for £100.00 plus postage and in addition to the mount includes: V2 sporter adapter; V3 mount; Extension rod and coupler Picatinny mount for the the magneto mount. When new the kit was $200 plus shipping from the US.

I also don’t like reloading but, when I started it was about cost and accuracy. Now it’s about not having to make a trip to the gun shop so often as it’s a reasonable distance away. Can’t say I enjoy it to be honest; just another job.

I double a cardboard box up and hold it in the ground with stakes and staple the paper target on the cardboard.

In reality it probably makes little difference but I trim to the shortest length so they are all the same.

Good point MM