dodgyrog

Viht 160 is much better

With a cast 500gr boolit and 27gr Viht 120 my Handi Rifle kicks like a mule so I use that as a maximum. Approach this load with caution.

I find my Parker Hale likes cast boolits and it takes half the powder.

I just had a look - some interesting stuff on there.

Lovely rifle Wish I had the money and the variation!

They're on hold at the moment until their range approval comes through

100 x .308 cases. Sized, deprimed, trimmed to length and case mouths deburred/chamfered. £25 100 x .243 cases. deprimed only. £20 Shipping cost is £3 per 100 cases More than 100 of each available.

PM sent ref the 8mm bullets

Would you take £20 for the 8mm Speer bullets

SMPF - French

Hannams is (or at least was) the importer

SOLD pending the usual

£35

Hornady Custom Grade die set. Sold as used but in reality new or nearly new. £40 posted

I would probably start with a jacketed bullet load of Viht 140 - the starting load. I did this with my 416 Rem Mag and it worked well. The cast boolit strength is the limiting factor and quality of alloy is important (not just the hardness)

Goes without saying!

Yes please PM on its' way

You are best putting your phone number in a pm NOT the forum!

I have some lube I have made for my pistol calibre boolits Send me a pm and I will send you some. You will need a heater if using a Lyman, Star or RCBS lubesizer

S1 I believe. Good luck getting a variation!

SOLD pending the usual Thanks for looking

Carbon steel I believe (but might well be stainless). It's stained but no corrosion, bore is perfect. Barrel length is 25 ½” 1 in 12 twist Chamber dia. Is overall 1.158” for 2.4” Knox form is 2.9” long and ends at 0.74” and then the barrel tapers to 0.60” at the end.

E R Shaw 30 calibre barrel for sale Not licensable until chambered 1 in 12 twist £100 Preferred collection but shipping is possible

My friend is using 18.5gr Viht 110 with a 200gr boolit (similar burning rate as 2400). I've been using 18gr of 2400 in my 30-06 and 8mm Mauser with heavy cast boolits.

This is the ONLY die I would recommend to expand the case mouth to the right size. Use one for a 303 not a 308 as the boolit should be around .316" diameter and tou do not want it swaged down when seating in the case.