gunnery Posted October 28, 2015 Author Report Share Posted October 28, 2015 Hi All after supplying a few Annealing machines to forum members I have had feed back from a few members who have made valued suggestion on how to improve on design so taking these points on board I have now added them in to the design 1 suggestion from a member was to add a upstand at the back of machine so when not in use they could store gas bottle and flexi pipe and supply cable this as now been added see photo thanks 2 another member suggested adding non slip rubber feet this as now been added thanks all members who have received there machines where delighted with the way they operated faultlessly and easy to adjust the torch,wheels etc after several test made with 6.5 284 brass I am finding without wheel change the machine will anneal from 6ppc 6br through to 6.5 284 brass thanks for all the suggestions made from members Link to comment Share on other sites More sharing options...
gunnery Posted October 28, 2015 Author Report Share Posted October 28, 2015 Link to comment Share on other sites More sharing options...
gunnery Posted October 28, 2015 Author Report Share Posted October 28, 2015 Link to comment Share on other sites More sharing options...
John MH Posted October 28, 2015 Report Share Posted October 28, 2015 Top job there Gunnery, if I did not already have a Giraud Tool Machine I would certainly get one of these, good luck with future sales. Link to comment Share on other sites More sharing options...
walkabout Posted October 28, 2015 Report Share Posted October 28, 2015 Apparently that's my machine nearly ready to ship? Looks good. Thanks Gunnery. Mark Link to comment Share on other sites More sharing options...
gunnery Posted October 28, 2015 Author Report Share Posted October 28, 2015 yes it is almost ready Mark just waiting for your Brass to run it through and make sure al is well thanks Link to comment Share on other sites More sharing options...
finnbear270 Posted November 1, 2015 Report Share Posted November 1, 2015 A great read thru, It's heartening to see such good feedback & even better to see excellent equipment can still be made in the UK, with realistic time scales being kept to. Link to comment Share on other sites More sharing options...
walkabout Posted November 3, 2015 Report Share Posted November 3, 2015 Gunnery Received my machine today...very impressed. Works really well. Thank you for the quick turnaround, and checking that my 7mm SAUM cases feed. Great job, highly recommended. Mark Link to comment Share on other sites More sharing options...
gunnery Posted November 3, 2015 Author Report Share Posted November 3, 2015 Thanks Mark always glad when they arrive safely Link to comment Share on other sites More sharing options...
Treedave Posted November 4, 2015 Report Share Posted November 4, 2015 Gunnery, It's looking good. I'd be needing to use the machine for 338 as well as 308/260 cases, am I correct in assuming that it would need a change of feed wheel(s)? Could you let me know the prices involved in a machine and any extra wheel (if needed). PM me if you prefer. Cheers Link to comment Share on other sites More sharing options...
jungle_re Posted November 5, 2015 Report Share Posted November 5, 2015 Just seen this. Which is a shame as I'd already precured an annealezz machine. Huge kudos to you one for a cracking design and two for actually producing them for retail. Well done Stirling work sir. No need for luck the product speaks volumes in itself. Ps if I ever set mine on fire or club handed brake it, I know where I'll be coming Link to comment Share on other sites More sharing options...
gunnery Posted November 5, 2015 Author Report Share Posted November 5, 2015 Thank you jungle for those words of encouragement Link to comment Share on other sites More sharing options...
gunnery Posted November 23, 2015 Author Report Share Posted November 23, 2015 Hi all I have had a few enquiries about deliveries leading up to Xmas all I can say is if anyone is thinking about a machine coming up to Xmas get the order in now thanks. Link to comment Share on other sites More sharing options...
johnnyb0_1 Posted December 15, 2015 Report Share Posted December 15, 2015 Gunnery, just found this video. Well done you Sir. Looked at some of the threads on here for a while as someone said unfortunately they didn't come to anything. I'd be up for one, if your still turning them out. PS. If you've a bit of spare time over the hols, how about a powered Dillon 650? LOL. Please PM with the details. JP. Link to comment Share on other sites More sharing options...
gunnery Posted December 15, 2015 Author Report Share Posted December 15, 2015 Yes PM sent Johnny thanks Link to comment Share on other sites More sharing options...
gunnery Posted January 8, 2016 Author Report Share Posted January 8, 2016 I have one of my Annealing Machines all ready built up ready to go next day delivery this machine will do cases from 6mmbr through to 6.5 x 284 comes complete and ready to go you just need the gas bottle coleman gas or map gas PM me if intrested thanks Link to comment Share on other sites More sharing options...
gunnery Posted January 8, 2016 Author Report Share Posted January 8, 2016 Machine now gone thanks Link to comment Share on other sites More sharing options...
rsc1960 Posted January 8, 2016 Report Share Posted January 8, 2016 did Gaz ever make any more ? having trouble with my effort and getting a bit miffed with the timer set up ? thanks bob. Link to comment Share on other sites More sharing options...
gunnery Posted January 8, 2016 Author Report Share Posted January 8, 2016 Hi Bob who is Gaz ? you must be mixed up with another Annealing machine not one of mine there is no timer needed on my machine only one control and that is to control revolution of index wheels Link to comment Share on other sites More sharing options...
rsc1960 Posted January 11, 2016 Report Share Posted January 11, 2016 Hi Bob who is Gaz ? you must be mixed up with another Annealing machine not one of mine there is no timer needed on my machine only one control and that is to control revolution of index wheels Hi G Sorry I was looking at 2 forums to try and sort mine out, I will just keep saving up the funds and get one, or just send my brass to be done got me, Yours looks like a cracking bit of kit, all I wanted was one for the 20 tac and 6 br brass ,seems silly now as the br has only seen 480 shots so they don't get to much stick, Bob Link to comment Share on other sites More sharing options...
gunnery Posted January 11, 2016 Author Report Share Posted January 11, 2016 Ok Bob I thought you had got confused with some one else never heard of Gaz Link to comment Share on other sites More sharing options...
tisme Posted January 11, 2016 Report Share Posted January 11, 2016 Got the machine today and already put 150 cases through it. Very easy to set up and easy to control. Made very sturdy and well thought out. Very please with it, thanks Barry. Link to comment Share on other sites More sharing options...
gunnery Posted January 11, 2016 Author Report Share Posted January 11, 2016 Thanks Pete much appreciated and glad you like it Link to comment Share on other sites More sharing options...
Mick Miller Posted January 20, 2016 Report Share Posted January 20, 2016 Hi Barry, please could you confirm whether this could be set to work with .22 hornet and .17 hornet brass (both quite small). If so I'm very interested so please pm me a price and any delivery info. Good work and well done on a bit of 'cottage industry'- you can't beat that! (I make my own digital add-ons for myself and friends that give the dedicated digi-sights like the 870 a good run for the money). Link to comment Share on other sites More sharing options...
gunnery Posted January 20, 2016 Author Report Share Posted January 20, 2016 No sorry Mick that case is a little to small Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.