baldie Posted November 13, 2020 Report Share Posted November 13, 2020 One of last weeks guns. This is a 6XC built on a Bighorn origin action. The barrel is a 1-7" cut Sassen, muzzle threaded M18x 1 and invisible capped. It also has one of my new brakes. Trigger is a Bix N Andy. The stock is a very rare Sentinel, fitted with its own floor plate and AICS mag. Its been fully bedded. The one area which had to be be cut away and altered was the ejection port, dont think anyone would know though ! Paintwork is Cerakote Tungsten . As always, all work is done in house by myself. Quote Link to comment Share on other sites More sharing options...
terryh Posted November 13, 2020 Report Share Posted November 13, 2020 Very nice indeed Dave, Everything you need and nothing to don't. Tidy bedding job 😎 I know that 'plastic' stocks are not trendy vs chassis but the Sentinel still feels right, although in saying that Terry Cross is coming out with a chassis system in the near future which will be interesting to see? Quote Link to comment Share on other sites More sharing options...
John MH Posted November 13, 2020 Report Share Posted November 13, 2020 How long is the barrel? Quote Link to comment Share on other sites More sharing options...
Ronin Posted November 13, 2020 Report Share Posted November 13, 2020 Lovely Job Dave Quote Link to comment Share on other sites More sharing options...
baldie Posted November 13, 2020 Author Report Share Posted November 13, 2020 7 hours ago, John MH said: How long is the barrel? Cant remember without looking at the spec sheet John, probably 26" Quote Link to comment Share on other sites More sharing options...
John MH Posted November 13, 2020 Report Share Posted November 13, 2020 Should be able to get 3000 FPS+ with that. Quote Link to comment Share on other sites More sharing options...
baldie Posted November 13, 2020 Author Report Share Posted November 13, 2020 Oh no bother John. I had mine out just before lockdown, trying the new reloder16 in it. Get yourself a tub, its even better than vhit 160. Quote Link to comment Share on other sites More sharing options...
John MH Posted November 13, 2020 Report Share Posted November 13, 2020 I use RL17 (RS60), is there an RS equivalent? Quote Link to comment Share on other sites More sharing options...
blackburnbuccaneer Posted November 13, 2020 Report Share Posted November 13, 2020 Although RE 16 is made by Nitrocheme (RS) for Alliant I don't think they have launched it in their own right yet. Quote Link to comment Share on other sites More sharing options...
gunner Posted November 14, 2020 Report Share Posted November 14, 2020 Love the tungsten finish, im wondering why is there a shortage of the sentinel? If there's demand there - which im sure there is ? Quote Link to comment Share on other sites More sharing options...
terryh Posted November 14, 2020 Report Share Posted November 14, 2020 Gunner, It is not so much a ‘shortage’ more the fact that KMW akaTerry Cross, is a single person, so between building rifles for LEO & FED plus training of same and military he just does not have a lot of time to just put stocks together. The basic stock ‘blanks’ are made by McM for him, but  finishing is carried out bu him. So if he gets dragged off to do instruction then it all goes on pause. once you have used one for a while you’ll see why they are though in demand 😎 Terry Quote Link to comment Share on other sites More sharing options...
gunner Posted November 14, 2020 Report Share Posted November 14, 2020 TY terry i did think it must be a small company - good for him being busy too at these times Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.