mluha Posted December 8, 2018 Report Share Posted December 8, 2018 I have produced a metric and imperial version slide ruler that helps to calculate the range to target.https://roundmildot.com/ Who would be a good person to send it for testing and reviewing? Thank you, Mattias Quote Link to comment Share on other sites More sharing options...
Nick 53 Posted January 17, 2019 Report Share Posted January 17, 2019 It’s a pity If it was for wind calculation I’d buy one, strictly MOA user. But in fairness it looks simple to use. Quote Link to comment Share on other sites More sharing options...
mluha Posted January 17, 2019 Author Report Share Posted January 17, 2019 Thank you Nick for the comment! Is there a "universal wind calculation device" out there that does not depend on the type of weapon and ammo? Quote Link to comment Share on other sites More sharing options...
Ronin Posted January 17, 2019 Report Share Posted January 17, 2019 Happy to test it in field conditions (all weather use) Quote Link to comment Share on other sites More sharing options...
Andrew Posted January 19, 2019 Report Share Posted January 19, 2019 I'd do the Imperial model if you are looking to nick the US market. We shoot in all weather and wind, out to 1865 yards in MOA and MIL. Importantly, all of our spotting scopes are in MIL, which would suit this unit nicely. Might cost you a little more in postage, though...🙂~Andrew Quote Link to comment Share on other sites More sharing options...
mluha Posted January 19, 2019 Author Report Share Posted January 19, 2019 Thank you Ronin and Andrew: I sent a message to you Ronin. Andres: please write me directly: messages do not go through to you. Mattias (info@roundmildot.com) Quote Link to comment Share on other sites More sharing options...
Ronin Posted January 25, 2019 Report Share Posted January 25, 2019 Thank you recieved and will post findings 😃 Quote Link to comment Share on other sites More sharing options...
johnnyb0_1 Posted January 27, 2020 Report Share Posted January 27, 2020 I'd be up for one of these when they go into production. J. Quote Link to comment Share on other sites More sharing options...
mluha Posted January 29, 2020 Author Report Share Posted January 29, 2020 Hi! It is in production: https://roundmildot.com/product-category/mildot/ The metric version has incorrect angle shootings markings and hence -50% discounted: it shows the distance to the target correctly and MIL to MOA conversion works also. Mattias Quote Link to comment Share on other sites More sharing options...
Brummy Mark Posted January 30, 2020 Report Share Posted January 30, 2020 Please point me in the direction of the Patent. Quote Link to comment Share on other sites More sharing options...
mluha Posted April 10, 2020 Author Report Share Posted April 10, 2020 Dear Mark, I added "How does it exactly work" page - the utility model I had registered is not anymore valid and it does not make sense to spend money on renewing it. Yo will find link to the utility model and exact mathematical working principle description from here: https://roundmildot.com/howitworks/how-does-it-exactly-work/ Mattias Quote Link to comment Share on other sites More sharing options...
mluha Posted April 12, 2020 Author Report Share Posted April 12, 2020 The new version of Round Mil Dot calculator is finally out: https://roundmildot.com/product/roundmildot-metric-calculator-with-dope-card-sticker-a-grade/ This calculator has nothing printed on the back side: the back side is white. It comes instead with 10 back-side stickers where you can write your personal DOPE card information. If you chance ammo or the sticker wears off, you can just use the next sticker. The sticker also has exact measures of most common targets (IPSC ja IDPA) and other objects like cars, weapons and traffic signs. The traffic signs sizes are not the same all over EU - there are links under the product description to the sources - the ones there are correct in most cases. I also added thumb slots to the front of the calculator for better grip - this is especially useful while working with gloves. I had a bit of trouble in finding the balance between all the suggestions I received on how to make the calculator better - I hope the new version is a good compromise and will be well received. If you find any mistakes or have good suggestions how to make it even better please e-mail me: info@roundmildot.com Mattias Luha Quote Link to comment Share on other sites More sharing options...
sean c Posted June 25, 2020 Report Share Posted June 25, 2020 I've received my Round Mildot today and the quality is very good with nice crisp engravings and sturdy plastic material. Service from Mattias is excellent as well. I look forward to giving it a try when I can. Quote Link to comment Share on other sites More sharing options...
mluha Posted June 25, 2020 Author Report Share Posted June 25, 2020 Thank you for your kind comment. :) If there are any ideas on how to make it even better, then please do let me know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.