tonyshooter Posted April 27, 2020 Report Share Posted April 27, 2020 I have a safe are on my shooting land which i use to zero my rifles. Can anyone suggest design for a target card holder to securely hold the A4 size zeroing targets that I print myself. The target holder needs to go into the ground and cannot be suspended. Thanks, Tony Quote Link to comment Share on other sites More sharing options...
Gandy Posted April 27, 2020 Report Share Posted April 27, 2020 I double a cardboard box up and hold it in the ground with stakes and staple the paper target on the cardboard. Quote Link to comment Share on other sites More sharing options...
terryh Posted April 28, 2020 Report Share Posted April 28, 2020 Tony, Another good backer is the ‘plastic’ sheet that estate agents use for their for sale signs, it’s like corrugated cardboard but plastic. Or, if you can leave your target holder in place, builders use an orange netting as perimeter debris control, stretch about a metre of this between two posts and you can then clothes peg targets to it. T Quote Link to comment Share on other sites More sharing options...
L B Jefferies Posted April 28, 2020 Report Share Posted April 28, 2020 As terryh says above, "Correx" is brilliant. It's waterproof and you can staple targets to it. If you're struggling to find something sturdy to hold the targets, MTM make the Jammit target holder that you can slot cardboard or Correx into. Quote Link to comment Share on other sites More sharing options...
miki Posted April 28, 2020 Report Share Posted April 28, 2020 I have a couple of old roads sign frames which I staightened up and have a ply sheet in and use sticky tape... I like the idea of Correx Quote Link to comment Share on other sites More sharing options...
jcampbellsmith Posted April 28, 2020 Report Share Posted April 28, 2020 https://www.dropbox.com/s/chb0ec6817ifc9k/Simple A4 target holders.jpg?dl=0 Regards JCS Quote Link to comment Share on other sites More sharing options...
MarkR Posted April 28, 2020 Report Share Posted April 28, 2020 Simple and effective.... Simple A4 Target Support.pdf Quote Link to comment Share on other sites More sharing options...
john pembroke Posted March 11, 2022 Report Share Posted March 11, 2022 (edited) I make an A4 target holder with safe back-stop and pellet catcher. I can be post mounted od sat on ground using the 2 legs supplied. More info at johnpembroke@tiscali.co.uk Edited March 11, 2022 by john pembroke Additional information Quote Link to comment Share on other sites More sharing options...
Mattnall Posted March 11, 2022 Report Share Posted March 11, 2022 MTM Jammit target holder. These work great and can hold smaller and larger targets than A4. Quote Link to comment Share on other sites More sharing options...
john pembroke Posted March 18, 2022 Report Share Posted March 18, 2022 Made from off-cuts and scrap Quote Link to comment Share on other sites More sharing options...
Wapinschaw Posted May 1, 2022 Report Share Posted May 1, 2022 I made up a holder out of wood offcuts and a mismatched pair of hinges. It's portable and lives in my garden range shed. I use bits of cardboard as target backing, staple the target on and bin it when shot away. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.