Jump to content

.338 Deviant...


Recommended Posts

One of this weeks finished rifles.

This a .338 Lapua magnum.

HWqHynH.jpg

Built on a Defiance Deviant long magnum action.

The barrel is a Bartlien 5R Heavy straight taper blank, finished at 30" { if I remember correctly ] and finished with an M18 x 1 muzzle thread, invisible cap, Sako Brake, and a jet-z SL7 sound moderator.

WKTi2Du.jpg

The trigger is a Timney Calvin Elite unit, and the metalwork is finished in H series OD green.

The stock is a new Ai AX unit.

This was stripped down to the last nut and bolt, and completely blasted.

Base coat applied and a flash cure.

Then the colours were applied, one by one, with a flash cure in-between. The plastic parts have to have a cooler cure, which extends the times considerably.

It has to be part assembled in-between, to allow the pattern to blend across the stock.

When all colours are on, its a full strip, and a final cure.

Takes forever. :lol:

Colours are OD Green, AI dark earth, and Armour black H series cerakote.

F1oErKG.jpg

istLez3.jpg

BHUWrZC.jpg

Turned out nice I think.

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy