Adamdavi3s

Here are some hand picked ones that I bothered to measure, I have only briefly shot one target at 100y

I wouldn’t say it’s doing this consistently yet but clearly it’s capable.
I believe it needs 1000rnds minimum to be considered “run in” and I have not done any work in finding the ammo that it likes. These were SK Match as well I believe but might have been Long Range match
 

A significant amount more than this I am lead to believe. 

The importer had this in the country before the recent price rise and the pound went in the shitter

👍

RRP is $2800 for the base greyboe model, so +£275 for the timney, plus the rail, plus the bolt knob then add shipping, VAT, import duty etc… gives you an idea 

WITHDRAWING FROM SALE

I keep looking at these targets and realising nothing else will get close and I'll never get another Vudoo for this kind of money.

 

I keep flip flopping on this and I am sure I will regret it, but for personal reasons I am putting my Vudoo V22 up for sale

Purchased directly from the importer in December

gun-22LR-RH - V22 22LR Right Hand Barreled Action

20"Kukri, Threaded, 30 MOA, Lrg Knob, Sniper Gray

upg-ravage-ridgeback- V22Ravage Ridgeback Model Upgrade
stk-4091ra- GrayboeRidgeback M-Loc Stock- Raw,Right Hand

trg-3025rh - Timney Trigger - 510 v 2 Elite Hunter, Thin Curved Shoe,
Right Hand

prod-0150 - V22Bottom Metal -Extended Mag Release, Graphite

acc-6096 - Plano Single Rifle Case 

The stock came to me with two very minor cosmetic imperfections as photographed.

In addition I upgraded the trigger to a timney calvin elite custom which is fitted

Vudoo are sending me some additional stock spacers which I will forward on.

The importer also has some more mags on order which I will offer the buyer first refusal on.

The target photo is 50y using run of the mill SK rifle match out of the box which I shot pretty quickly / not very carefully 

Rifle, One magazine, hard case only

£2750 not interested in any offers but may take a cheap .22Air FAC in PX 

Happy new year! 

Yes please if that price is posted? 

Thank you, yes have managed to order directly from VQ as they use easy export 👍

Ok seems like I can probably print the plunger

Will include the dies with the 6mm 👍

Does anyone happen to know who might have Remington 597 spares in the UK or have better google-fu than me 

My 597 has thrown the extractor and plunger “somewhere” apparently a common issue but obviously I only know this now it’s happened to me!

The extractor can be had from brownells but the plunger appears to be impossible to find this side of the pond 

👋

👋

👋

👋

I used eley club and edge for years.

Haven’t touched the stuff since edge became team, utter pile of rubbish. On average I think I got about 2 in 10 failure to fire across about 5 boxes. Edge was incredibly consistent and performed very well in anything I fed with it. 
 

Eley is also “stubbier” than SK so never fed well in my RPRR, I also tried some left over tenex today and it just jammed up against the front of the mag in the Vudoo then went super when I hand loaded one 

Thats SK Rifle Match, think I’ll try some Centre x at some point as everyone rates it in the Vudoo and still getting a lot of vertical variance 

Long Range performed similar but about half were going super sonic 

I think if I’d shot 10rnd groups, they’d have all been 1” or bigger 

Cheeky Boxing Day shoot today 

Big bit of paper is 50y, zero then groups

The other is 100y with a couple of the groups measured 

10 minutes ago, Foxwhistler88 said:

What muzzle thread is the howa please?

Hi,

I’m 99% sure it’s a 5/8-24 but I can ask the RFD to confirm if you’re interested 👍

Huge price drop on the all but new Howa 

18 minutes ago, shotgunner said:

Can I ask the best price for the 107 please 

As listed 👍

Up we go, can probably still get it posted in time for Christmas the PF gods being kind 

Bumpity bump

@ruger7717 the 107s are now for sale if of any interest, I ended up taking the 6mm off ticket rather than keeping it 

• 3 years later...

Up

Grayboe Ridgeback stock (similar to MDT XRS) with MLOK, R700 AICS inlet (requires bottom metal), a couple of marks  as can be seen, I was told it was brand new on the rifle but on picking it up it was clearly “ex demo” however other than the photographed marks it’s in great working order. 

Only had minor use in my Vudoo but I just prefer the adjustability of a chassis. 

included additional stock spacers (fitted), MLOC screws and also a low profile screw to replace the adjuster knob if required 

£450 posted 

optional extras neither of which are for sale separately:

Area419 arca rail which is what is recommended for it, brand new in packaging from spud £125

Vudoo AICS bottom metal and action screws, obviously this is AICS pattern but .22 so not sure what compatibility it would have with standard AICS mags £125

If you have any questions then please ask and I will do my best to answer and if you’re local you’re more than welcome to come try it / test mag comparability etc