-
Posts
778 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by Dellboy
-
-
-
-
12 hours ago, geek said:
I eventually purchased NGT Green Insulated Fishing Bag - NGT Online from Amazon, seems ideal for the money.
Thanks for the recommendation.
been using one for a few years now good choice
-
3 hours ago, Catch-22 said:
I too bought the same bag for lumping various bits of stuff (rear bags, ammo, torx wrench, kestrel etc etc). I use it in addition to the AIM bags I use…which are very helpful (especially using backpack straps).
The above fishing bag I bought off Amazon I think.
its been really good, especially when it rains as the central compartment stays dry inside.
But I’ve found the zip recently went. I think I just overloaded it.
my next purchase will be a 4x wheel folding trolly/buggy. Easier on the shoulders of carrying two rifles plus mat plus range bag etc etc.https://www.ngtdirect.co.uk/product-page/dynamic-carp-trolley
these work well and fold up
-
10 hours ago, ds1 said:
Re 224 Valkyrie, it’s becoming my favourite rifle, home loaded 88g Hornady Eldm’s will get around 805 m/s at 15c and Hornady factory Match 88g Eldm’s around 815 m/s at 15c out of my 20” JP Ar15. Accuracy is good with both factory and home loads producing sub 4cm 5 shot groups at 300m. This is better than a lot of the YouTube vids seem to indicate.
Two caveats, my rifle is semi-auto so I am loosing maybe 40fps with the gas system and the attraction to me is an AR15 mag length round with a high for caliber bc that is supersonic at 1km.
I know Baldie has built a few 224V bolt guns so would highly value his experience. Also as far as YouTube goes Ultimate Reloader ( Gavin Toobin?) has done videos on his 224V Ar15 and bolt gun builds.
In a bolt guns there are obviously not the same magazine and bolt face constraints that are inherent in an AR15 platform so then I would maybe be looking at 22br if you’re only going to home load. 224V is still good ( or has been for me) with factory ammunition.
That in semi auto would shame a few bolt guns supebly accurate (even with me behind it )
-
Hawke are fine sold lots had a couple back under warranty but all dealt with fast (about 10 day turn around )
Vortex good but wondering how much you pay for the name/warranty .
Riton 3x24 x56 seem good value at just over £500 sold around a dozen with no returns
-
Just now, Dellboy said:
Bullet
9,1 g / 140 gr Nosler, Ballistic Tip C.O.L. 68,8 mm / 2.709 inch
Powder Starting load Maximum load Type Weight Velocity Weight Velocity [g] [grs] [m/s] [fps] [g] [grs] [m/s] [fps] N540 2,09 32.3 706 2316 2,33 36.0 777 2549 N150 1,94 29.9 660 2165 2,19 33.8 732 2402 N550 2,23 34.4 717 2352 2,45 37.8 787 2582 N555 2,42 37.3 736 2415 2,72 42.0 808 2651 N160 2,37 36.6 701 2300 2,67 41.2 780 2559 N560 2,57 39.7 741 2431 2,87 44.3 818 2684
https://www.vihtavuori.com/reloading-data/rifle-reloading/?cartridge=95
-
Bullet
9,1 g / 140 gr Nosler, Ballistic Tip C.O.L. 68,8 mm / 2.709 inch
Powder Starting load Maximum load Type Weight Velocity Weight Velocity [g] [grs] [m/s] [fps] [g] [grs] [m/s] [fps] N540 2,09 32.3 706 2316 2,33 36.0 777 2549 N150 1,94 29.9 660 2165 2,19 33.8 732 2402 N550 2,23 34.4 717 2352 2,45 37.8 787 2582 N555 2,42 37.3 736 2415 2,72 42.0 808 2651 N160 2,37 36.6 701 2300 2,67 41.2 780 2559 N560 2,57 39.7 741 2431 2,87 44.3 818 2684
-
-
-
7 hours ago, No i deer said:
There's some cracking 51m groups there 👏 👏.
I know from my own experience finding the right lot of ammo is so crucial..
My CZ452 wasn't ment too be a tac driver but with the right ammo it can be..
It looks like the custom barrel is the way forward for ultimate accuracy.
457 lrp at 50 yards 0.38 inches CCI MINI MAG , Standard gun in one of our chassis
-
22 hours ago, OSOK said:
I understand what your saying and it sounds right put that way ... I guess my frustration is down to one area allowing it without any fuss only to find my area stating the paid part stops me being a servant .. They seem happy enough with my circumstances to grant me an RFD for the same purposes but it still seems a play on words but with an additional application fee ... Or am i being a Cynic
But would it be possible to do the same service for other RFD'S if so whose RFD would you be on ?
-
-
if its still available pm me please
-
Shoot a varmit barrel 24 inch howa 1500 in 223 out to v bulls at 600 yards with 77 gr GGG Ammo .
-
are the ATX any lighter ?
-
3 hours ago, English Rifleman said:
Do we have to "join the club" to do this too
Join the club and do the training i believe
-
9 hours ago, Shooter_762 said:
How much to post to Devon
cant post powder
-
38 minutes ago, deadcenter said:
Thanks Dellboy.
i have no connection with them but was considering using them for my trade adverts the jury is still out on that ....
-
released earlier
Good Morning Guntrader Friends,
After the launch of the website, we expected one or two glitched which we thought we would be able to deal with quickly and smoothly with minimum impact on you guys.
We appreciate this was a frustrating time for you all and with that in mind we decided to revert back to the old website last night.
We would like to thank you for your patience and your continued support.
We hope to speak to you all over the week to receive feedback from you all.
Warm Regards
Guntrader. -
They are a good scope sold probably 4 or 5 and keep a couple in stock as said a good cheap daylight scope at that price ..
-
-
2 hours ago, telf said:
Ive just turned my mossberg 500 into a section 1 , and it was just a case of buying a new mag tube , if i want to change it back you just swap the tube back over
guess you sent it for proof then ?
-
52 minutes ago, Popsbengo said:
How do you deal with the transfer between FAC and SGC ?
Convert to section 2 then sell
Mdt grips and cheek piece
in For Sale (Free Adverts for Private Secondhand Items only)
Posted
money sent messaged address