stephentri

Hi Richard Thanks looks like i will go with a average BC between 0.331 and 0.319

Yes I have updated it if you look at my screen shot you will see 6 different BC for the 140g eldm for the Kestrel all from the applied ballistic link ,I was looking to know what one to use, your thoughts please.

On the box hornady give a BC of 0.326 the non personalized BC is 0.291 given by kestrel link ballistics going by this and real data the BC is to low has any one else found this.

Hi looking at the bullet library up loaded for my kestrel 5700 it shows 6 different options for 140g eld-m what BC are yous using in your kestrel

Anyone ?

Hi Have any off you compared G7 to custom curve on your real shooting data

Hi Looking at kestrel 5700 ballistic vs 5700 applied ballistics, apart from not storing as many guns and not having drop scale factor which really only matters when shooting at transonic ranges,the main differences is custom curves,is it worth spending the extra money to get custom curves,how much better is it than G7 BC shooting out to 1000y any real world information would be grateful. Thanks

Using sea clean and hot water 2, 15min cycles has mine clean

https://www.blackrifle.co.uk/MDT-AR15-Pistol-Grip-p/mdt-grip.htm I have this one on my ESS

Hi I have noticed that when I clean brass with the ultrasonic cleaner the inside of the necks almost appear rough, do any of you polish the inside after cleaning, is there any benefit in doing. Thanks Stephen

I have a Mdt ess can't fault it, easy to get behind,the biggest difference I noticed when I changed from a traditional style stock was the way the rifle recoiled back in a straight line with no muzzle rise.

Pm send

Pm send

Anyone got advice on this

Hi out of the 3 powders which one would you recommend for 150 to 178 grain bullet for a 3006, 24 inch barrel,I know all 3 will work but looking to keep to one powder,Thanks

https://www.blackrifle.co.uk/MDT-Long-Action-AICS-Metal-Magazine-p/mdt-mag-la.htm

I have a MDT ess chassis with my tikka t3 6.5x55 it takes mdt steel mags for 6.5x55 up to 300 win mag .

One of these from teir one, hope this helps

Nothing wrong with the 6.5×55

Cz have had one for years , good rifle

I bump the shoulder back every time with a Redding body die then neck size with a lee collet die I have found this method has less run out than using the redding full length bushing die.

+1

Hi I am using cfe 223 in my .223 77gr tmk getting good results

With my kahles k624i I can see . 223 holes on white paper at 300 y .what rifle scope are you using?