Andy RV Posted September 4, 2017 Report Share Posted September 4, 2017 Hello, I require assistance from a friendly Sako TRG owner for some stock dimensions! I've got a Tikka CTR which I'm going to attempt to produce a laminated stock for in the style of the TRG. I've ordered the stock blank from Finland and have hopefully worked out the profile from images, once I've got some reference dimensions I'll print a full size pattern to work from. I require the following dimensions if anyone would be so nice kind as to measure up when their rifle is next out; Stock overall length (including recoil pad if you're using the factory pad) Thickness / width across the magazine / action area Thickness / width across the grip Thickness / width across the rear portion of the stock Once I've made a start I'll make build thread. Many thanks, Andy Link to comment Share on other sites More sharing options...
lambsey Posted September 4, 2017 Report Share Posted September 4, 2017 Were are you located? Link to comment Share on other sites More sharing options...
Andy RV Posted September 5, 2017 Author Report Share Posted September 5, 2017 Closest town to me is Market Drayton in north Shropshire. Link to comment Share on other sites More sharing options...
lambsey Posted September 5, 2017 Report Share Posted September 5, 2017 you have a pm Link to comment Share on other sites More sharing options...
Andy RV Posted September 17, 2017 Author Report Share Posted September 17, 2017 Well I've been making sawdust and so far its not quite firewood! I printed a fullsize image of the TRG stock and then used that to make a plywood template to follow with the router. Before any serious profiling and while the laminate was mostly square I let the action and bottom metal into the stock. With the exception of the very rear of the action I cut everything approx. 1.5mm big for the bedding compound. The bottom metal was a bit of a pig due to the depth! And this is where I'm up to as of today, I've got some Devcon 10112 on the way for the bedding which i'll do before getting the sandpaper out. Link to comment Share on other sites More sharing options...
overspray Posted September 17, 2017 Report Share Posted September 17, 2017 That looks Scooby do like it Link to comment Share on other sites More sharing options...
Andy RV Posted November 16, 2017 Author Report Share Posted November 16, 2017 Here's the finished stock; Link to comment Share on other sites More sharing options...
Scotch_egg Posted November 16, 2017 Report Share Posted November 16, 2017 Excellent work. Link to comment Share on other sites More sharing options...
Gandy Posted November 16, 2017 Report Share Posted November 16, 2017 Looks fantastic. Link to comment Share on other sites More sharing options...
brown dog Posted November 16, 2017 Report Share Posted November 16, 2017 Superb! Link to comment Share on other sites More sharing options...
Montey Posted November 16, 2017 Report Share Posted November 16, 2017 Good job Link to comment Share on other sites More sharing options...
Andy RV Posted November 16, 2017 Author Report Share Posted November 16, 2017 Cheers gents! Link to comment Share on other sites More sharing options...
tecuani Posted December 20, 2017 Report Share Posted December 20, 2017 Apart from the colour of the stock it looks remarkable like a Tikka T3 Sporter (and as my first rifle I developed a love for it!) Needless to say I am impressed by the nice work you did! Have fun with it! Tec Link to comment Share on other sites More sharing options...
Breacher Posted December 20, 2017 Report Share Posted December 20, 2017 Looks great - how many hours did you put into it ? Link to comment Share on other sites More sharing options...
Scotch_egg Posted December 20, 2017 Report Share Posted December 20, 2017 If any one fancies an actual TRG stock and trigger for a T3 make contact with me. Please be aware its not going to be cheap. Link to comment Share on other sites More sharing options...
Andy RV Posted January 6, 2018 Author Report Share Posted January 6, 2018 No idea how many hours sorry! It took approx. 3 weeks of occasional evening and weekend sessions. If I didn't have the day job to get in the way I'd imagine 3 - 4 full days should be plenty of time. Link to comment Share on other sites More sharing options...
Anthony Posted December 5, 2018 Report Share Posted December 5, 2018 Hi Andy, Thinking about building my own sako stock clone myself any chance of grabbing the dimensions you used or any other help would be greatly appreciated. Regards from down under. Anthony Link to comment Share on other sites More sharing options...
Andy RV Posted December 9, 2018 Author Report Share Posted December 9, 2018 Hello Anthony, In the end I took a high quality picture of the TRG from the Sako website and printed it full size. To scale it the length of my stock including the recoil pad is 760mm. My stock has had an unfortunate accident, I dropped the rifle and spit it at the grip! I’d recommend reinforcing this area. Link to comment Share on other sites More sharing options...
Anthony Posted December 9, 2018 Report Share Posted December 9, 2018 Thanks Andy that measurement should do the trick. Shame about the split in the stock. Only other thing is 1 where did it split in the handle and any recommendations on strengthening it. and 2 what is the thickness of your stock (I'm going to laminate some marine ply together) Regards and thanks for the help. Anthpny Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.