3D printed Mauser 98 bolt de-cocker tool

[1066]

I've just designed and printed this little gizmo to de-cock a M98 bolt - works very well.
 

 

[david harvey]

Do you make them for Sako 75

[1066]

Not at the moment David -  I can't see any problem with making one but I would need an actual bolt for a few days, it's sort of thing you can't make by measurements when 3D printing. It takes several tries and a bit of tweaking every time to get it right. The plastic stuff shrinks a bit as it cools and not always in the same direction but once you have the machine dialed in it's right every time. The Mauser one took ten prototypes before I was happy - actual printing takes around 3 hours each.

I've also just made on for the Remington 700 bolts:

 

[david harvey]

If you do get round to making them for the 75 give me a shout

[Mike C]

My example for a Savage Model 12  FTR in .308

   

From a distance you'd think it was a plumber's 15mm pipe slice 😃, but it Works a treat. 

[Re-Pete]

I use my thumb....

Pete

[Mike C]

8 hours ago, Re-Pete said:

I use my thumb....

Pete

Got any skin left on it or are you down to the bone 

[Re-Pete]

Only use the thumb to de-cock it.......I have a c-spanner carefully ground to cock it.

Pete

[1066]

On 12/16/2023 at 7:53 PM, Mike C said:

My example for a Savage Model 12  FTR in .308

   

From a distance you'd think it was a plumber's 15mm pipe slice 😃, but it Works a treat. 

 

Good job..👍

[Mike C]

21 hours ago, Re-Pete said:

Only use the thumb to de-cock it.......I have a c-spanner carefully ground to cock it.

Pete

Let's have a look it, I'm always interested in weird and wonderful stuff 🙃