ds1 Posted April 24, 2021 Report Share Posted April 24, 2021 Does anyone know of a U.K. / European suppressor manufacturer that makes 9mm carbine suppressors that are 35mm diameter ( to fit inside a hand guard) and are 220-275mm long? Thread pitch is 13.5x1 LH Quote Link to comment Share on other sites More sharing options...
Webley Posted April 25, 2021 Report Share Posted April 25, 2021 https://www.cgfirearms.co.uk/rs-9-9mm-suppressor Check it would be ok on a carbine as it is designed for semi auto pistols. It is a little shorter at 205mm than your requirements. LEI is an english company and produce these and others for military's, hence the NATO numbers. I have an LEI mod in 7.62 with QD and am very happy with it. Matt Quote Link to comment Share on other sites More sharing options...
ds1 Posted April 25, 2021 Author Report Share Posted April 25, 2021 Matt, thank you for the reply. I will send them an email. Usually pistol suppressors come with a ‘booster’ - basically the barrel to suppressor mount is spring loaded to allow the pistol slide to cycle, not desirable when putting it on a PCC. Some companies like Suppressor Co ( US) offer a solid spacer to replace the spring........I’ve been thinking about doing a similar modification to an ATec MM6 suppressor.........but there might be something already available that I don’t know about. A picture or two may help to explain what I want to achieve - suppressor inside the hand guard. Sig mpx pcc 16” barrel is the start Ditch the hand guard for 14” Lancer carbon. ID is 42mm Ditch the barrel for 6.5” barrel ( legal in Czech). End of barrel to end of hand guard is 200mm as best I can measure- hence the maximum 35mm OD and 220mm minimum length required. Quote Link to comment Share on other sites More sharing options...
Dellboy Posted April 25, 2021 Report Share Posted April 25, 2021 Contact DPT http://www.dpteuro.co.uk/ Very happy to talk oddball specials . Quote Link to comment Share on other sites More sharing options...
Shuggy Posted April 25, 2021 Report Share Posted April 25, 2021 B&T SMG suppressor probably comes closest to your needs: https://bt-ag.ch/en/produkt/bt-smg-pdw-suppressor-cal-9mm/ Diameter is correct, correct thread can probably be ordered. It’s just a bit shorter than you need. I think that it would probably be easier to just order a slightly longer barrel, or use a shorter handguard. Otherwise you will probably have to go for a custom build from one of the numerous boutique suppressor manufacturers, some of which have already been suggested. Quote Link to comment Share on other sites More sharing options...
ds1 Posted April 26, 2021 Author Report Share Posted April 26, 2021 Thanks for the information Derek and Shuggy. I think I will start off with an A Tec and make a spacer to replace the booster spring thing and add more baffle sections to get the desired length. I am not wedded to A Tec - just it has the right 0D ( 35mm) and is modular. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.