Rangefinder Posted September 12, 2019 Report Share Posted September 12, 2019 Hi advice required is a 1-10 twist .243 suitable for 103gr hornady ELDX tHanks Jimmy Quote Link to comment Share on other sites More sharing options...
snakeman Posted September 12, 2019 Report Share Posted September 12, 2019 Jim Your question is vague ...It'll do it (just about) but it'll be more 'miss-than-hit' most likely...better off using 80g-95g for more stability....but be more specific with your Q atb Quote Link to comment Share on other sites More sharing options...
Fox Tales Posted October 7, 2019 Report Share Posted October 7, 2019 Rangefinder , I suspect it will require a 1 in 8 twist to stabilise . You could check by entering the bullet details into a twist calculator (JBM) . Length = 32.03 mm Diameter =6.17 mm Weight=6.67 grams G7=0.258 As Snakeman pointed out you may well be at the barrels limit at the 85 to 95 grain bullets. Especially if they're the slippery sort . Quote Link to comment Share on other sites More sharing options...
banus02 Posted October 25, 2019 Report Share Posted October 25, 2019 good afternoon ,my tikka sv will not stabalise the 103gr eld and it is a 1 in 10 20" barrel Quote Link to comment Share on other sites More sharing options...
Moorlander Posted October 25, 2019 Report Share Posted October 25, 2019 There`s the issue with nearly all factory 243w`s , they are 1:10 yet sold for deer stalking and in Scotland and NI you have to use 100gr + , Quote Link to comment Share on other sites More sharing options...
Rangefinder Posted November 22, 2019 Author Report Share Posted November 22, 2019 Thanks folks I’ve got a good accurate load using 100gr Sierra soft points Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.