kimbo65 Posted September 4, 2016 Report Share Posted September 4, 2016 Hi, I've just picked up my new AX308. I have the 3 barrels for it. I want to use N150 for all 3 calibers, bullet weights are 140 smk/6.5cm(38.5 grn), 6mmbr 107 smk(30.5 grn) & 308 168 hpbt(44.5 grn). Do you think these loads are ok?. Link to comment Share on other sites More sharing options...
Scotch_egg Posted September 4, 2016 Report Share Posted September 4, 2016 n150 is good for the .308 and the 6mmbr with the bullets you intend to use. It maybe a little fast for the 6.5 140gr bullets. You would have to try it for real world results. N160 appears to be the preferred powder for 140gr bullet. Link to comment Share on other sites More sharing options...
BlueBoy69 Posted September 4, 2016 Report Share Posted September 4, 2016 Kimbo65, What 6.5 mm cartridge? I take it's the 6.5x47 Lapua as that means they can all share the same bolt (face). If that, then N150 is suitable for all three with those bullets weights. Vihtavouri load data for: 6 mm BR Norma; 6.5x47 Lapua; 308 Winchester. N140 might be better with the 6 mm BR, according to their data (the accuracy load), but you'd just have to try. Neil Link to comment Share on other sites More sharing options...
dannywayoflife Posted September 4, 2016 Report Share Posted September 4, 2016 He says 140 smk/6.5cm so I'm guessing it's a 6.5 creedmoor?? Link to comment Share on other sites More sharing options...
kimbo65 Posted September 4, 2016 Author Report Share Posted September 4, 2016 Hi, yes it's a 6.5 creedmoor. A couple of years ago HPS loaded me some creedmoor ammo using the 140 bullet/N150, it worked OK with this load in my sako trg. Link to comment Share on other sites More sharing options...
Brillo Posted September 4, 2016 Report Share Posted September 4, 2016 I'm about to try some N150 loads in my Creedmoor. These loads were confirmed as excellent by a guy on the Creedmoor Facebook page. I'll let you know how they worked asap. Link to comment Share on other sites More sharing options...
kimbo65 Posted September 4, 2016 Author Report Share Posted September 4, 2016 Thanks Brillo. Link to comment Share on other sites More sharing options...
Shuggy Posted September 4, 2016 Report Share Posted September 4, 2016 Does your AX feed the 6BR, or is this one a single shot only? And just to be proper nosey, are these the Paddy Dane made barrels sold by Sporting Services? Link to comment Share on other sites More sharing options...
kimbo65 Posted September 5, 2016 Author Report Share Posted September 5, 2016 Hi shuggy, sporting services single shot mag, got the 6br barrel from them as well. The creedmoor barrel came off my old aw, that is a bartlein. Link to comment Share on other sites More sharing options...
activeviii Posted September 5, 2016 Report Share Posted September 5, 2016 I use to use n150 in the Swede. Found it was all pressure and no speed. Also tryied in the creedmoor but same on that. Group was ok but not great. Switched the swede to n160 and the creed to rs62 Link to comment Share on other sites More sharing options...
Borisserge Posted September 5, 2016 Report Share Posted September 5, 2016 The 6mmbr seems to be good on accuracy with N150 Link to comment Share on other sites More sharing options...
Brillo Posted September 6, 2016 Report Share Posted September 6, 2016 Yup, 39.7 grains of N150 works well with the 140 grain SMK in my Creedmoor. Having said that H4350 is still the best. Link to comment Share on other sites More sharing options...
kimbo65 Posted September 6, 2016 Author Report Share Posted September 6, 2016 That's interesting Brillo, I'll try 38.5gr & see how that goes. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.