GRS Long Range Stock in Camo for Tikka T3 Inlet

[Gazza0208]

Sold.

 

Used a few times in 2014, just over a year old. I am changing this Rifle soon and so this particular inlet can not be used any longer. This sale is for the stock and its combined components only, no scope, gun or bi-pod. It has a hairline 20mm scratch just above the grip, and a small mark on the lower underside where I attach a bi-pod, I have not even tried to remove them as they really are quite hard to see. Comparable and along with other GRS stocks I have, if your a small person or short in the arm length, this may not be for you.

 

 

*Oiled finish (Just had its semi-annual oiling along with the others I have)

* Tikka T3 Varmit Inlet

*0.5" limbsaver/GRS recoil pad (full height adjustable recoil pad available at cost)

* Stratabond Laminate

* SpeedLock adjustmet

*30mm adjustment LOP and cheek-piece

* Weighs 1900grams (+ - % depending on weapon inlet)

* 100% drop in inlet

 

It will come in its original box, for what that’s worth as its not the best of made cardboard container. But I will repack it all.

 

£400 Inc postage.

 

An Extract from the GRS website "The design is derived from the sporter stock, with the same grip and SpeedLock system. The butt is however lengthened 15 mm, has a more generous butt hook and an integrated mono-pod with quick release, micro adjustment and a total of 55 mm of travel in height. The forend is also 50 mm longer and has a flat bottom for supporting against bags or rests. The longer for-end also provides a better mounting position for bi-pods and aids in balancing long and heavy barrels. Two 70 mm spaced sling mounts is provided as standard. The stock is pre-drilled for the VersaPod spigot (installation required) and an Atlas bi-pod picatinny rail can be mounted to the stock with the sling mounts.

Also advertised elsewhere

 

PHOTOBUCKET :-

http://s163.photobucket.com/user/gazza0208/media/Benches/GRS%20LR%20CAMO/IMG_0005_zps0971a3ac.jpg.html

http://s163.photobucket.com/user/gazza0208/media/Benches/GRS%20LR%20CAMO/IMG_0004_zpsa13a5c97.jpg.html

http://s163.photobucket.com/user/gazza0208/media/Benches/GRS%20LR%20CAMO/IMG_0003_zpsac93f32f.jpg.html

http://s163.photobucket.com/user/gazza0208/media/Benches/GRS%20LR%20CAMO/IMG_0002_zps2b32645f.jpg.html

http://s163.photobucket.com/user/gazza0208/media/Benches/GRS%20LR%20CAMO/IMG_0001_zps39607214.jpg.html

[Re-Pete]

If only it was for an M595................

 

H/man

[gunner]

Does anyone know if the bolt holes for the T3 action are the same distance appart as a M590? Prob not , but if they are i am interested !

[Gazza0208]

The action inlets are not the same on any differing Tikka Model so it wont fit.

 

Does anyone know if the bolt holes for the T3 action are the same distance appart as a M590? Prob not , but if they are i am interested !

Tikka models will not "interchange" as each one is dedicated to fit that Action applied to, so it wont fit. But as a thought, I may get round to selling the whole setup, ex-scope, if I can get my hands on a 6.5x55 t3.

[Gazza0208]

The action inlets are not the same on any differing Tikka Model so it wont fit.

 

Does anyone know if the bolt holes for the T3 action are the same distance appart as a M590? Prob not , but if they are i am interested !

Tikka models will not "interchange" as each one is dedicated to fit that Action applied to, so it wont fit. But as a thought, I may get round to selling the whole setup, ex-scope,

 

If only it was for an M595................

 

H/man

I have a 595 myself on the Hybrid Model, bigger all round, but the next model up from th LR, 595 inlets are made in most action inlets FYI.

if I can get my hands on a 6.5x55 t3.

[gunner]

Well the plan was to rout it out to suit , knowing the t3s shape is like a v but M590 flat ! Itd prob not really be cost effective anyways , bummer , but thanks .

[Re-Pete]

Hi Gazza,

 

So is the Hybrid more substantial than the Long Range? Is the fore-end longer?

 

H/man

[gbal]

Hi Gazza,

 

So is the Hybrid more substantial than the Long Range? Is the fore-end longer?

 

H/man

Hybrid is 1600g (Long Range was 1900g),and "is derived from the Long Range,with forend 50mm longer than sporter/varminter"-whatever length they were! But it is 300g lighter apparently than the LR........my guess is that it is not so long as the Fclass was....then there is the Kelbly(maybe US only....?)...

 

gbal

[Gazza0208]

Hi Gazza,

 

So is the Hybrid more substantial than the Long Range? Is the fore-end longer?

 

H/man

Yes the Hybrid in my opinion seems to handle on a far more firmer and substantial basis than the Long Range, and it is longer as pointed out, it can drown a shorter length barrel (looks) in my opinion also, but thats just my own thought. I also have a hyrid on a Rem 25-06. Its weight differential, being lighter, comes from the basic relief contour, nothing much else. If put them against each other, you would look at them and think the reverse. if you place one against the other in ease to handle on a lighter action I would prefer the LR.

 

http://s163.photobucket.com/user/gazza0208/media/IMG_0045_zps13038438.jpg.html

[Krico]

I inletted a t3 stock for a 595 to use t3 bottom metal.

[Davidfranklin]

Stock arrived today