lee w 118

On 3/1/2020 at 9:02 PM, Scotch_egg said:

Lee I think you need to do a new post on your new a action, especially on that stock you have. 
 

my Accuracy International AT mags scratch the fudge out of the 6.5x47 brass I am running. I am following suit With the 800 grit and elbow grease. 
 

 

Scotch, just take your time doing  it and it will work fine . My thinking obout using a short mag is less sticking out, and a lot less to snag on when your out using your stick.👍

Alright Scotch, had it from the states.Had a hour yesterday with some 800 grit, its as smooth as glass 😁 .Got stung for duty but never mind. I can use AW and Aics in new action so i will give these awhirl and try 10 shot Aw only thing will be is i will have to change mag release catch for AW mag. With the Aics mag there is not a lot of protrusion out of the magwell so pleased with the end result , 😁

Just had mag conversions delivered,  top lips on mag are scratching the brass. As any one done sanding on steel to smooth out  feed lip imperfections 👍

Thanks vince 👍

On 4/14/2016 at 11:52 PM, The Gun Pimp said:

Just over 3400fps with the 80 gn bullet. Barrel? I think my current one is 30 inches

Hi vince is there any chance you sending me your email address   so i can have a chat about your .22 Dasher please , thanks Lee

I will take it Bob pm me cheers Lee, be ok for shooting shed 👍

Seen that myself , could be a winner, winner chicken dinner. Looks and sounds doable 😁 but expensive 

Cheers fella 👍

Please contact me if sale falls through cheers Lee 👍

Cheers  Lee

Thanks for your advice,  but im not looking at a .223 case in 224

Its a 6mm GT case necked to .22. Not every ones cup of tea 😁

Got some 75eld match, and  77g TMK to try .

Cheers Lee

Cheers fella thanks for your time  👍

Let me reiterate,  the action im having can use Aics and Aw mags. But as to if i put pressure on mag system   ie rest on mag ,i am led to beleive , i might have bolt drag runnig IACs, and if Aw i dont 👍.can you measure your Aw catch cheers Lee

Hi there gents , is the mag release on a Aics mag shorter than a AW mag 10 SHOT, in my HABU it runs Aics mags , so if i want to run AW mags will i need a longer  mag catch to run the mag , cheers Lee

I have been using , this Acebeam k75 for walking lamping foxes very affective, fitted camera handle. Beast of a throw 😁

Cheers lads , ive got big shovels so the triggers shoes are a big plus for me , thanks for info 👍

Thanks Andrew

Hi there are any of the members using the above trigger on there boom sticks, can you tell me your thoughts compared to a jewell trigger cheers Lee. And what are prices compared to jewell 

Payment made cheers Lee

I have tried to contact hornady but no reply as of yet , cheers Lee

Hi there, what freebore would i need on  .224 75g and 80g bullet.

The bullets are Hornady 75g and 80g ELD match. 1-8 twist

Why im asking is that i have to spec this when ordering new reamer

And could i , if i want shoot hornady 53g v max in the same chamber

Below are bullet lengths , cheers Lee 

You have a pm regards Lee 

Thanks for all advice will speak to fao to clarify 👍