-
Posts
1,115 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by lee w 118
-
-
6 hours ago, lapua said:
see if they'll let you take one over to the ZCO stand for a comparison. you could bash them together and see which one comes out on top
I will feel compromised thou, 🤣🤣
-
Might pop up to show have a Gander , pop and see you DS1
-
Bit lighter than the 5x25x56 and 3x27x56, so think I will have a gander, at the P5FL .👍 i will enquire on price aswell.
-
-
Opology to the opp . Yes !. Never heard of this on any other scope before ??. Joking apart what is good in your opinion might not be mine. It all boils down to preferences, you say your zero compromise is better than a PM11 , that's just your opinion .Haven't looked through a ZC and always had, S&B, my choice for what shooting I do 👍😁.
-
2 hours ago, One on top of two said:
I wouldn’t take a great deal of notice, there’s only a handful of people that have even seen one let alone look through one. I shoot quite a few different ranges and I always get people have a look through mine and come away gobsmacked .
Some tend to compare it with there poxy PM 11s , which were great 20 years ago. It’s quite laughable.
the hardest thing would to actually find someone credible who actually slates them . Or even a bad review.
I've had PM11 scopes since 2006, POXY seem to work. HAVE A LOOK on snipers hide , in optics section . I think ZERO COMPROMISE , Has been compromised 😁
-
-
It Will be good for left handers. Bolt will not hit illuminated switch . Just seen P54L ret have a gander IWA if you can , post your finding👍
-
-
-
Best of luck 👍with your sale
-
TAB GEAR do moderator covers well made a made to measure, comes in different colours aswell Jeff 👍
-
That's what it's all about scotch 😁👍
-
-
Alright Dave tube is on order , should be here February time. I've gone 7.5 . So we will have to wait and see what it likes . 👍. I have ordered new bolt face for BAT.mine is 2piece construction so .540 on 6mm prc not a problem.
-
On 6/27/2021 at 7:15 AM, terryh said:
Lee,
What are you shooting to get 3400 mv with 108g - that’s no slouch 🤔
I’m using a 1:7.5 twist in a 6mm Dasher and with 105 Bergers that is a comfortable 2970 but you are ‘way’ past this configuration
Good luck and I assume you have a spare barrel on hand 😉😂
Alright Terry ive been speaking to a gentleman in USA he has 6MM PRC This is what he is getting out of his 6mm boomer with 105g
-
Alan who built the rifle best regards Lee. Nice stick👍
-
Cheers for your thoughts Dave . The above video he is shooting the 6.5 , so that helps I guess. I will have a bang with it on me Dasher😁 .Then try it on me PRC . I won't be shooting long strings so heat haze shouldn't be a problem. 👍
-
Impulse not bad on this rifle👍
-
11 hours ago, baldie said:
I bought one to try it out before selling to customers.
I won't be.......
It does neither, as I suspected.
What's your verdict? Then Dave
-
All i did is get the rifle level first, there is a threaded collar and a what i can explain is a locking collar , the double threaded collar screws on to your rifle and you then adjust the locking collar to level the brake end up? . This is the first time of had a Atec, so i thought it was pretty straight forward one you get you head round it 😁. Next time im out i will throw it on me .22 Dasher and post my findings 👍
-
-
No , not that I know of? . It took me 6 seconds to screw it on thou😁
-
All in one rifle
in General Discussion
Posted
I am contemplating the same quick change system in .22 and 6mm warp spead rifle, west texas ordanence switch barrel system on two calibres. 22Gt for rabbits and foxes PRC FOR WARP SPEED steel , egg shoot at Diggle. Can't seeing it being a problem , just have some indexing marks on action , tubes and set scope (zero) for one calibre then zero for second, make a note on final zero and repeat for both tubes. Won't be a million miles out. That's my plan any way😁. Got a new bolt head for my TR action for PRC WARP rifle so that's what I am doing in the next few months. I could buy a new action but another 2k and trigger say £300 -.£2300 all up , I will save me pennies and I mite put it towards a 6-36-56 PM11. I have a a 7.5 Bartlien carbon landing shortly 24" . CANT see me parting with my chassis at the minute solid base, and not too heavy.i know its not everyone's cup of tea , but I like the concept of 2 calibres on one action and ease of changing.