lee w 118

New boom stick 6MM PRC 😁 warp speed Mr sulu . Just getting cases done for reamer

6mm prc Terry, if the bullet don't hit what I point it at! The lands or throat will 🤣😂

Hi there will it be possible to run 108g eldm in a 8T and still shoot the 110 Atip  . Ideally  wanted to run 90 eldx and 110 Atip . I know hornady says 7.5 to 7.7 twist but they will be at 3400 at the muzzle that is Atip the 110g . I want to run with a 1-8 twist .  Is it better to run 108g eldm , and 110Atip or 90eldx And 110g atip . Cheers in advance Lee . I want a dual varmint target spec rifle. Like the sound of 90g eldx @ 3600 , 3700ISH 😁 What twist will I need for each cinario 

108g & 110g atip -?

90g&110 atip-?

Bit of advice needed , cheers Lee

Thanks Andy I will have a gander over the weekend , what length will I need, never ordered one before , and thanks John👍

Can any of the members point me in the right direction to aquire the above blank , for bullet seater for my 6mm PRC  project 😁 please , cheers Lee

What twist will stabilise a 90g to 110 pill in the above calibre . Some are saying 7.5 twist others are saying 8 twist . I have a bit of load data in the 108g @ 3480 . So not going to be a slouch , and that was with a 8 twist. Any information will be gladly appreciated cheers Lee. Just want to get tube ordered in the right twist .Thanks for looking

Aw mag length is 2.980 cheers Lee

Question, will I need a modification on BAT TR BOLT to accommodate 6.5 prc case. Action is on a Br case. And also how much room will I have if I use magazine AW , cheers Lee

Reloading International,  just email them and make a account,  good bunch to deal with cheers

On 4/19/2021 at 7:10 PM, Shuggy said:

The HRD Gear 6mm br mag kit for the AW/AT/AX308 mags seems to be the one that consistently gets the best comments on the US forums, but I have yet to read a really thorough review, including comments on feeding reliability. I think that Sporting Services is now selling them.

Feeds my 22Dasher flawlessly  HRD 6mm mag conversioin AW mag 10 round

Now sold thanks Neil 

Bump

Bump 

Now sold many thanks Lee

feb , bump

Yes mate still foresale👍

Bump

Get one brought ya tight git , On order with Mik, after a faf about with local gun shop . Keep you updated scotch. Regards Lee

No still. Waiting off jacksons

BUMP will take £150 Delivered if not sold at that price will keep hold of them , cheers Lee

BUMP £110 Delivered 

Be a fun cartridge for varminting. Whatch this space 😁

On 8/15/2018 at 9:08 AM, trucraft said:

When and if Hornady factory ammo turns up here. 

You get a 6.5 short action mag that will shoot factory ammo.

Not going to change the industry by any means but if it became available over here it would be cool.

I think anything that gives us shooters more choice is a good thing. 

Unfortunately it's Hornady that are giving it to us?

I think a 6mm PRC would be interesting.

 

http://bulletin.accurateshooter.com/2018/08/its-official-saami-approves-hornady-6-5-prc-and-300-prc/

Its got my attention in 6mm PRC and 70g bullets 😁 it will be fun

Please note, there are no nitride bushing sold with die set, or Brass, in with sale just to clarify😁 will be advertised elsewere 😢

Last Mag provisionally sold, thanks Lee