Re-Pete
-
Posts
1,706 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by Re-Pete
-
-
Probably made the mistake of taking a sniff at one some time.......
Pete
-
We have a set in a wooded area at the back of our place, and we've not seen a hedgehog in the garden before this little guy turned up a week ago. We've been feeding a one eyed feral cat for a while, and I put out a trailcam to see how he was doing. These are snaps from the videos.
The cat is in a bad way, covered in fleas and ticks, and we're hoping to trap him and get him sorted. He was very nervous and backed away from the little hog.
Pete
-
And it's all down to putain........
Pete
-
It's small rifle primers that are in short supply, apparently.........
Pete
-
I find the gas fired job sold by "raptor calls" works very well, and appears to give consistent tension, judged subjectively by feeling the resistance when seating bullets.
Annealing also prolongs case life........I bought mine after suffering a spate of split necks. Not had a problem since, and I'm getting 20+ firings from Lapua brass.
And I was told by a successful competitive shooter 9 or 10 years ago that consistent neck tension has more effect on group size than weighing powder to a tenth of a grain......
Pete
-
OK, update.....be VERY careful when reading the webpages. The Shoot-n-c targets arrived, but there was only 1 packet of 25. The word "piece" is apparently used to mean 1 target, or 1 packet of 25 or 50.......
And I got an email telling me that this is a partial shipment..........🤪
Pete
-
So far so good.....a 2Tb USB 3.0 flashdrive for £4.39, delivered in 14 days. (And it works)
Still waiting for the targets, though...
Pete
-
Next shoot, I'm taking an old foam filled armchair seat cushion to try exactly that...........constantly getting up and down off the mat also causes me considerable discomfort, to say the least. I think maybe just a bit of support under the midriff might suffice.
Pete
-
Are they a reliable source of watches? They haven't listed the same model, but I just spotted another Tag that I could live with 🤪
Pete
-
I scored this on ebay a while back. I think it's genuine. The innards look kosher, and it gains around 2 seconds a week, so they probably are.
Best of all, it's a sensible diameter and thickness.
Pete
Pete
-
And then read Scotcheggs' post at the top of "Wanted" first.......
Pete
-
Click on "Forums" (forum index) at top left of home screen, and scroll right down to the bottom.
Pete
-
I never dreamt they'd have a sense of humour.....
Pete
-
-
You get either 50 x 50, or 25 x 50, and they're 8" in diameter.
Pete
-
Having read that piece, Laurie, I think I'll try the KVB-223 Standard primers (brass coloured cup) in my 6BR at an MV around 2600 fps, using RS 62. (I have around 900 left).
Pete
-
I punted on 1250 8" self adhesive shoot-n-c targets for 0.9p apiece......I'm not holding my breath......!
(And if they do turn up, I'm not going to put 'em up on ebay for £4 for 10 🤣 )
With my big fat 80X spotting scope, they'll be good for 600yds self-marking.
Pete
-
Anyone used this site for buying stuff? Any problems with transactions, shipping etc.?
Pete
-
I had a look at that....what's the point of the "crush control" ? An added complication to justify a higher price?
Surely all that's needed is to be able to feel when the rim of the primer cup hits the bottom of the pocket.
At that point, the anvil is, by design, at the optimum position to allow the percussion of the firing pin denting the cup to ignite the charge.
Squeeze any harder when priming, and you'll likely distort the cup, forcing the anvil to push gently through the compound and touch the inside surface of the cup, thus killing the primer........or it'll go bang.
Pete
-
Most people have their "funny ways".....thing is, not to take this "soshul meedja" malarkey too seriously.
There's stuff to be learnt from every shooter..... (including what NOT to do.....)
Pete
-
Can anyone recommend a reasonably priced trailcam? My cheap and cheerful CamPak T45 has just given up the ghost.
I plan to get inside and try a repair, but I'd like to get another different one meantime.
I'm looking for HD resolution, and ability to be powered from a remote USB power pack.
Pete
-
Now I wonder who that could be? 🤣🤣🤣
Pete
-
I use BR4, 450, and Remington 7 1/2 in mine, and I shoot the heavier bullets, 73 to 80.5 grains at velocities up to 900m/s .
Russian KVB-223M were the best "bangs for buck" primerwise, but no doubt thanks to Gollum, no longer available.
Pete
-
.223 is a fairly high pressure cartridge, and it's just possible that a standard primer will pop and burn the bolt face........I speak from experience, having once mixed up some spilt KVB Magnum and Standard primers.
My 223 still bears the scars...
Pete
new watch
in Watches (I'm not a WIS, but.... )
Posted
They get good reviews, fwiw...
Pete