Finman Posted October 11, 2010 Report Share Posted October 11, 2010 hi there chaps, seeing that I can find no comparative data and fearing for the integrity of my limbs and face ( ), before I go on and put any loads together it would be good if I could find whether there are limits I should not cross. Does any one out there with access to quickload be prepared to run RL17 through it for 129gn (6.5mm) Interlocks and for 139gn Interlocks (7mm) and 150gn GMKs (7mm) for the 6.x55 and 7x57 cartridges? I'll buy the beers when I see you next! Best wishes, Finman Link to comment Share on other sites More sharing options...
Elwood Posted October 11, 2010 Report Share Posted October 11, 2010 Barrel length and COL will be required. If it hasn't been done by the time I get back from work, I will run it through this evening. Link to comment Share on other sites More sharing options...
Finman Posted October 11, 2010 Author Report Share Posted October 11, 2010 Barrel length and COL will be required. If it hasn't been done by the time I get back from work, I will run it through this evening. Oh you star! that's excellent! 6.5x55: barrel length 22 inches, COL 3100 7x57: barrel length 25 inches, COL 3100 thank you ever so much, Finman Link to comment Share on other sites More sharing options...
1967spud Posted October 11, 2010 Report Share Posted October 11, 2010 also need case capacity in cc of water Link to comment Share on other sites More sharing options...
Ronin Posted October 11, 2010 Report Share Posted October 11, 2010 Would do mate, but havent got RL17 in the powder inventory. Link to comment Share on other sites More sharing options...
Finman Posted October 11, 2010 Author Report Share Posted October 11, 2010 thanks for all your offers of help fellas, Elwood came up trumps and now I must pull the loads I made! In your debt sir best wishes, Finman Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.