baldie Posted January 11, 2010 Report Share Posted January 11, 2010 Would some kind soul do me a favour ? I,ve just got a new computer which has windows 7 installed, and i dont think their is a new quickload for it yet, so i,m stuck. I need some data for my 22-250 ackley. Its a 1 in 7" barrel at 28" long. I want to shoot the berger 90 grain VLD, with a br2 primer, and whatever vhitavouri or hodgdon powder is available on quickload [getting any of the powders is no problem] thank you. Link to comment Share on other sites More sharing options...
Elwood Posted January 11, 2010 Report Share Posted January 11, 2010 Dave, get in touch with Julian, you will need to send your old QL back and it will then be replaced and updated for windows 7. I'm in the same boat as you, but haven't got round to sorting it out, I believe someone said it cost £15 ish Sorry I can't help you out more. Link to comment Share on other sites More sharing options...
Ronin Posted January 11, 2010 Report Share Posted January 11, 2010 Dave I haven't the 90g VLD listed on my version (and it was upgraded in 09 from the states) The heaviest Berger VLD on mine is the 80g Obviously I dont know the 90 statistics or seat depth of your reamer - which affects pressure. Ive run the 80 with a 28" barrel. Vit 160 - 39g - 3213 FPS H4831SC - 38.5g - 3139 FPS RL19 - 38.5g - 3287 FPS All above are MAX loads on my system. Suggest 10% less as start point (or 15%) for the 90 grainers. I think you may make 2900 to 3000 reasonably easily, alot will depend on how much of the bullet is seated, all above loads are 101% fill (so partial crush load) Link to comment Share on other sites More sharing options...
baldie Posted January 11, 2010 Author Report Share Posted January 11, 2010 You,re a diamond Andy, thank you. I had a similar plan in my mind, but needed some hard data back-up. Walt Berger e-mailed me today with a comprehensive list of powders etc, and apologies for taking a while....they are extremely busy. What a nice man, and a lovely e-mail. Link to comment Share on other sites More sharing options...
Ronin Posted January 11, 2010 Report Share Posted January 11, 2010 Try PMing Brian Litz - he is a site member and consultant for Berger Link to comment Share on other sites More sharing options...
menial 1 Posted January 11, 2010 Report Share Posted January 11, 2010 38gr+ of N160 under 90gr Berger, care of - with lots of hugs and kisses from Chris apparently. Link to comment Share on other sites More sharing options...
TC Posted January 12, 2010 Report Share Posted January 12, 2010 90gr VLD's are in the latest QL bullet file. Ronin, I'll send you an email. TC Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.