bbob Posted December 23, 2009 Report Share Posted December 23, 2009 As above min to max load data for following bullet heads and powders 150 grain Hornady soft points with Varget and RL15 150 grain Speer boat tail soft points also Varget and RL15 THANKS HAVE A GREAT CHRISTMAS STUART Link to comment Share on other sites More sharing options...
shrek Posted December 23, 2009 Report Share Posted December 23, 2009 150gr Hornady linterlock soft point CCI 200 primer 43.8gr Varget powder This load is not a hot one, off the top of my head its close to the minimum load given my hodgdons webside, gives average velocity of 2650fps not the quickest load but it shoots in the .3s though my tikka M55, fallow dont seem to like it either Hope this helps Link to comment Share on other sites More sharing options...
grahamfarmer Posted December 23, 2009 Report Share Posted December 23, 2009 speer manual no 13 lists re 15 as max 49.0 grns compressed gives 2919 fps min 45.0 grns gives 2683 fps varget max 47.0 grns compressed gives 2856 fps min 43.0 grns gives 2632 fps there seems to be a point around 44 grns of varget that works for most people and other posts will give you more info as for my own loads using 150 grn hornady soft point and nosler 150 balistic tips 44 .2 grns of varget in lapua brass with cci br primer this load also work for me with 155 grn sierra palma matchking graham. Link to comment Share on other sites More sharing options...
ejg223 Posted December 23, 2009 Report Share Posted December 23, 2009 Hornady 150sp interlock. COL of 70.4mm did the trick for my rifle. Far away from the lands, but still grouped under 2" at 300m (field) with 44gr N140. 44gr Varget is about the same. 43gr h335 also works well. edi Link to comment Share on other sites More sharing options...
Reecy Posted December 31, 2009 Report Share Posted December 31, 2009 Hi, My favourite load in .308 is a lapua scenar 154gr with 47.0gr of Varget behind it. Not too high pressure with plenty of velocity and in my .308s gives good accuracy out to 1,000 yds. Reecy Link to comment Share on other sites More sharing options...
duey Posted January 3, 2010 Report Share Posted January 3, 2010 44gr N140 behind either 165gr gamekings or scenar 165 works well in my remmy loaded about 60thou off the lands ian Link to comment Share on other sites More sharing options...
menial 1 Posted January 3, 2010 Report Share Posted January 3, 2010 BBOB, you need to be aware that TRG owners tend to have loads which are generally 2-3grns more powder which work well in their rifles but tend to be extremely hot in more run of the mill kit, which is usually better served with around 43-44gr of Viht140, Varget or Reloader 15 with 155gr bullets in .308. Pete. Link to comment Share on other sites More sharing options...
sean c Posted January 3, 2010 Report Share Posted January 3, 2010 I run the 155 scenars set 12thou back with either 45.5gn of RE15 or 46gn of Varget with Lapua brass and CCI primers. Usual disclaimer. This is safe in my rifle! (TRG) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.