SOLD: RUAG once fired 5.56mm NATO brass

[Catch-22]

I’ve got 318x cases of once fired RUAG 5.56mm NATO brass.

I have done the following to it;

- swaged primer pockets to remove Mil crimp. It is now reloadable/reprimable

- cleaned up primer pockets and deburred flash hole internally (from down inside case)

- wet tumbled

- annealed with my AMP

brass is NOT resized yet, but it’s ready to be FL sized, trimmed, primed and loaded.

Due to odd count, I’ll sell as the following;

ALL SOLD!

[John MH]

They are 5.56mm NATO not .223 Rem and the flash holes on those are drilled not punched so they should not need to be deburred on the inside, good brass though.

[Catch-22]

Thanks!

[banus02]

IF... they are once fired ? why go to all the effort to do the work required when the buyer will do that and make the brass a lot cheaper ?

[Catch-22]

Thanks for the question. 
I had bought the raw brass and prepped with the intention of using in a build which didn’t happen.

I did actually find the inside flash hole deburring helpful as a fair bit of burrs were indeed removed.

Anyway, for anyone actually wanting to buy the brass, it’s good quality and all the prep has been done.

[Catch-22]

Price drop;

£45 per bag of 106x cases

or £120 for the lot (318x cases)

P&P at buyers cost.

[Catch-22]

Bump.

[david harvey]

Would you take £120 posted

[Catch-22]

15 hours ago, david harvey said:

Would you take £120 posted

Sure. I’ll send you a PM. Cheers

[Catch-22]

Now SOLD.

Cheers