martin_b Posted August 29, 2021 Report Share Posted August 29, 2021 Apologies if this has been covered elswhere but the forum seach function seems a bit sick. I've put in a variation for a 300prc for shooting out to one mile plus. it will probally have a minimum of a 26inch barrel. Im thinking of using berger hybrids but im unsure as the weight and powder combo. (I've a prefernece for either Viht or RS as they both seem available at Bisley) any advice or sugestions? (Oh and the reson Im asking now is I need to put in a large order for some other bits and Im trying to save on carraige!) Quote Link to comment Share on other sites More sharing options...
Mat Posted August 29, 2021 Report Share Posted August 29, 2021 I've been using RS76 with Berger hybrid 220 in 300 prc, raw chrono figures (not entirely sure what was going on some of the numbers look too high): 78.5gr 2755 2757 2781 2790 2771 79.0gr 2794 2793 2792 2792 2801 79.5gr 2957 2957 2844 2849 2831 80.0gr 2846 3165 2838 2832 2834 Quote Link to comment Share on other sites More sharing options...
Mat Posted August 29, 2021 Report Share Posted August 29, 2021 Looking promising at 1000y Quote Link to comment Share on other sites More sharing options...
martin_b Posted August 29, 2021 Author Report Share Posted August 29, 2021 Thanks, Is that a Begara? Quote Link to comment Share on other sites More sharing options...
Mat Posted August 29, 2021 Report Share Posted August 29, 2021 Yes, Bergara Wilderness. No complaints about accuracy but the barrel rusts like no other I've ever owned, so I have to clean it religiously and store it with a swab of oil. Quote Link to comment Share on other sites More sharing options...
martin_b Posted September 26, 2021 Author Report Share Posted September 26, 2021 My variation has come through 🙂. Ive put a tentative order in for a Bergara HMR Pro, (your rust story scared me!) Quote Link to comment Share on other sites More sharing options...
Mat Posted September 28, 2021 Report Share Posted September 28, 2021 Sensible... How much extra is the pro? Quote Link to comment Share on other sites More sharing options...
martin_b Posted September 30, 2021 Author Report Share Posted September 30, 2021 A rather steep £950, which buys you the Stainless and Cerakote barrel, the Premier action and a TriggerTech trigger, plus a few other minor upgrades. I think its also assembled in the States which may explain some of the uplift. Expensive I know but alternative options are few. Quote Link to comment Share on other sites More sharing options...
EMC Posted November 2, 2021 Report Share Posted November 2, 2021 Hello How does the recoil feel on this rifle anda this caliber? Quote Link to comment Share on other sites More sharing options...
martin_b Posted November 2, 2021 Author Report Share Posted November 2, 2021 Not sure yet as the rifle hasnt arrived yet , but I have fired a 300WinMag with a moderator, and while it was much more noticable than my 6.5CM it was certainly managable, plus I'll add weight till Im happy, it only has to get from the car to the firing point, Im not a hunter 🙂 Quote Link to comment Share on other sites More sharing options...
martin_b Posted January 26, 2022 Author Report Share Posted January 26, 2022 Just to wrap this thread up, the Bergara was supposed to arrive early Jan, it didn’t! Gave up on that and basically thought F*I* buy once cry once. Now I’m have Mik build me a Bernard action, Bartlein barrel, Dolphin Stock single shot 300PRC. Ive been up to Lincolnshire and seen all the bits so at least I know it exists! The one compromise i will have to make is to forgo the new scope for a while and use an spare Votex Viper I already have. Quote Link to comment Share on other sites More sharing options...
martin_b Posted March 19, 2022 Author Report Share Posted March 19, 2022 Its here :-) Quote Link to comment Share on other sites More sharing options...
Mat Posted March 19, 2022 Report Share Posted March 19, 2022 👍 With regard to powder, I've found N570 has about half the SD of RS76 and viht has loads of published data. The downside is that it has about the same consistency as twiglets Quote Link to comment Share on other sites More sharing options...
Popsbengo Posted March 19, 2022 Report Share Posted March 19, 2022 6 hours ago, martin_b said: Its here 🙂 very nice, same chassis and action as my .338LM only I have a Truflite 32" tube. I use N570, it is impossible to trickle so I use a small scoop (.22lr case trimmed down) to dump into the scale pan, works well. Then there's tweezers for fine adjustment 😉 Quote Link to comment Share on other sites More sharing options...
Mat Posted March 20, 2022 Report Share Posted March 20, 2022 14 hours ago, Popsbengo said: I use N570, it is impossible to trickle so I use a small scoop (.22lr case trimmed down) to dump into the scale pan, works well. Then there's tweezers for fine adjustment 😉 It trickles OK in my targetmaster though I agree tweezers are good. I also ended up buying an Area 419 mega funnel which is not 100% but much better than a standard one. Quote Link to comment Share on other sites More sharing options...
Popsbengo Posted March 20, 2022 Report Share Posted March 20, 2022 56 minutes ago, Mat said: It trickles OK in my targetmaster though I agree tweezers are good. I also ended up buying an Area 419 mega funnel which is not 100% but much better than a standard one. I made a stainless steel funnel from a £3:50 Amazon cooking funnel and a bit of turned brass, works a treat. Quote Link to comment Share on other sites More sharing options...
martin_b Posted April 23, 2022 Author Report Share Posted April 23, 2022 Had it first real outing @900y this AM, once I sorted the wind things looked promising, I think i might skip load devlopment all together and stick with what I'm using. Quote Link to comment Share on other sites More sharing options...
paul o' Posted February 9, 2023 Report Share Posted February 9, 2023 Bit late but how do you find the stock ,I have a new 300prc hmr wilderness but Wish I had it in a chassis . Paul Quote Link to comment Share on other sites More sharing options...
martin_b Posted February 9, 2023 Author Report Share Posted February 9, 2023 Its fine, more adjustability than I need, I think there is a used Dolphin L/A for sale on SD? Quote Link to comment Share on other sites More sharing options...
paul o' Posted February 9, 2023 Report Share Posted February 9, 2023 40 minutes ago, martin_b said: Its fine, more adjustability than I need, I think there is a used Dolphin L/A for sale on SD? 40 minutes ago, martin_b said: Its fine, more adjustability than I need, I think there is a used Dolphin L/A for sale on SD? thanks i'll go ad have a look . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.