6x47 lapua Posted October 31, 2020 Report Share Posted October 31, 2020 Hi to all what’s the opinion on this iv got a ASE JetZ Compact Sound mod on my .243 .25 Cal it’s mint 👍 but have a 6.5-284 barrel to collect for my Blaser iv not measured the hole size in the sound mod but it’s a .25 Cal one could I use that on my new 6.5-284 barrel it’s the same thread size or is the hole not big enuff in it ? i could put it in the lath and make the hole bigger ? Or should I just get a .30 Cal mod for it 😁 thanks for looking stay safe Cheers Stu 💥😁💪💪 Quote Link to comment Share on other sites More sharing options...
Jager Posted October 31, 2020 Report Share Posted October 31, 2020 dont risk it ...if the thread are even slighlty off centre then things could go very bad very quick ...get a 30 cal Quote Link to comment Share on other sites More sharing options...
Savage Steve Posted October 31, 2020 Report Share Posted October 31, 2020 The Blaser will probably be a 15-1 thread and may also be spigoted. I use three barrels for my Blaser one is spigoted two are not. I would definitely not be machining a mod out NO WAY. Steve. Quote Link to comment Share on other sites More sharing options...
6x47 lapua Posted October 31, 2020 Author Report Share Posted October 31, 2020 Hi there Jäger and Steve thanks for the reply’s fellers 👍 a think I’ll just get a .30 Cal mod iv just measured the bore hole it’s 7.2mm 🙈 canny close that like Steve my barrels are match barrel brother M18x1 nee sprigot iv got some standard barrels with M15x1 Spigot on I no what ye saying like mate thanks very much 👍👍 Cheers Stu Quote Link to comment Share on other sites More sharing options...
banus02 Posted October 31, 2020 Report Share Posted October 31, 2020 send an email to ase for their information.i use a jet z .25 on my 243 and 6.5x55 no problem and its in ase guide to use the .25 moderator for up to 6.5x55.my rifles are tikka and are factory threaded.i use 55 to 105gr in 243 and 100 to 156gr in 6.5x55. Quote Link to comment Share on other sites More sharing options...
6x47 lapua Posted October 31, 2020 Author Report Share Posted October 31, 2020 Cheers for the information banus02 👍👍 Quote Link to comment Share on other sites More sharing options...
Sherlock Posted October 31, 2020 Report Share Posted October 31, 2020 I Use a ASE Compact on my 6.5 Creedmore - no issues Quote Link to comment Share on other sites More sharing options...
Mark II Posted October 31, 2020 Report Share Posted October 31, 2020 I have the compact jet z on my 308. It works a treat and it's very solidly built Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.