Jump to content

1/4”x28 stock screws


Recommended Posts

Am I right to say Remington or a clone is 1/4”x28 for the stock screws ? 

Can these be sourced with Torx heads ? 

Also the forward one on my rifle I think is ever so slightly too short  ! Seems to tighten after only two revolutions, Iv had the stock off and the screw can easily be in another two turns without interfering with the bolt 

Link to comment
Share on other sites

Most custom (Rem footprint) actions have 1/4”x28 TPi threaded screws or cap head bolts 

 

Suggest you contact PRS (Callum Ferguson ) who sells BAT action screws for replacement they have a lovely deep head for an Allen key or appropriate bit (if using a torque wrench)

 

The screws will be supplied long and will need cutting to length but that is relatively simple task of you have basic engineering skills 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy