Dac9976 Posted October 8, 2016 Report Share Posted October 8, 2016 Hi all I've been doing some load development with the above bullets and powder. Really pleased with the accuracy but MV seems low,2450fps out of a 600mm Blaser match barrel....is this about right? Rifle is used for long range planking. Cheers Danny. Link to comment Share on other sites More sharing options...
dannywayoflife Posted October 8, 2016 Report Share Posted October 8, 2016 Seems very low to me whats charge weight? I was getting about 2700 in a 24" tikka t3 varmint with 140's when I had it. (Wish I'd never sold that rifle ) Link to comment Share on other sites More sharing options...
banus02 Posted October 8, 2016 Report Share Posted October 8, 2016 good evening,i have used 48grs n165 with 140gr amax at 2640fps out of a 20 inch tikka super varmint always used magnum primers as cases were sooty with fed 210 primers worked up from 45grs.hope this helps Link to comment Share on other sites More sharing options...
Dac9976 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Sorry I should of stated powder weight....45.8gr of N165 Link to comment Share on other sites More sharing options...
dannywayoflife Posted October 9, 2016 Report Share Posted October 9, 2016 That's a very light charge Link to comment Share on other sites More sharing options...
Dac9976 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Not sure I'm going to get much more in the case mate. Link to comment Share on other sites More sharing options...
Dac9976 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Not sure I'm going to get much more in the case mate. That's a very light charge OK I've just had a play about, looks like I could get upto 49grs in the case. I think I've been over cautious. I do find it hard reloading for a Blaser as there's not much to look for pressure wise,no stiff bolt etc. Link to comment Share on other sites More sharing options...
Dac9976 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Thanks banus02 your info is helpful. Link to comment Share on other sites More sharing options...
meles meles Posted October 9, 2016 Report Share Posted October 9, 2016 If the load is accurate, why chase velocity ? Link to comment Share on other sites More sharing options...
Dac9976 Posted October 9, 2016 Author Report Share Posted October 9, 2016 I was thinking a bit more velocity would give me a bit more range. I'm not after a hot load, I'm after a bit more performance Link to comment Share on other sites More sharing options...
gbal Posted October 9, 2016 Report Share Posted October 9, 2016 SAAMI spec 24" Barrel:drop/drift " and energy at 300y 10mph wind: Lapua 139Scenar ``@2740 -8.0/6.2 1539 Lapua 139 Scenar @ 2625 8.4/5.6 1494 Norma 140 Nos Part @2690 -8.5/7.1 1427 Fed Hi Shok 140 SP @ 2650 -9/7.8 1340 Rem 140 SP Core Lokt @2550 -9.8/8.3 1224 Win 140SP @2550 -9.7/8.0 1246 Horn 140 SP Interlock @2525 -9.9/7.8 1230 Lapua 140 Naturalis @2625 -10.3/11.2 1085 That should ell you something about chasing velocity,wirh the same bullet weight (though BC varies a bit-not important in a stalking rifle). Accuracy is more so-only test firing can sort that out. gbal Link to comment Share on other sites More sharing options...
Dac9976 Posted October 9, 2016 Author Report Share Posted October 9, 2016 So are you saying stick with what I'm doing or push it a bit more and see what happens. I'm using this rifle at longer ranges so variables will be greater at longer distances won't they? Link to comment Share on other sites More sharing options...
Swarovski1 Posted October 10, 2016 Report Share Posted October 10, 2016 Pump up the jam Link to comment Share on other sites More sharing options...
activeviii Posted October 15, 2016 Report Share Posted October 15, 2016 SAAMI spec 24" Barrel:drop/drift " and energy at 300y 10mph wind: Lapua 139Scenar ``@2740 -8.0/6.2 1539 Lapua 139 Scenar @ 2625 8.4/5.6 1494 Norma 140 Nos Part @2690 -8.5/7.1 1427 Fed Hi Shok 140 SP @ 2650 -9/7.8 1340 Rem 140 SP Core Lokt @2550 -9.8/8.3 1224 Win 140SP @2550 -9.7/8.0 1246 Horn 140 SP Interlock @2525 -9.9/7.8 1230 Lapua 140 Naturalis @2625 -10.3/11.2 1085 That should ell you something about chasing velocity,wirh the same bullet weight (though BC varies a bit-not important in a stalking rifle). Accuracy is more so-only test firing can sort that out. gbal Yep, somewhere close. 140interlocks are running 2582 out the Tikka with n165. Can get more but no need as its my stalking rig. On a side note. I'm running bing 160 prohunters at 2707 in the same rifle with same powder, no pressure signs but the shoulder push is a right slap now. Link to comment Share on other sites More sharing options...
Dac9976 Posted October 30, 2016 Author Report Share Posted October 30, 2016 OK so did some more development. Blaser match barrel 6.5x55 140gr ELDs. N165. 3rd groups. 46.5gr MV 2478fps 47.0gr MV 2508fps 47.5gr MV 2527fps 48.0gr MV 2548fps All produced clover leaf groups except the last group which had a flyer. Link to comment Share on other sites More sharing options...
gbal Posted October 30, 2016 Report Share Posted October 30, 2016 There you go. Two observations: Do you think 40fps is going to make any difference terminally? And is one flier in three shots likely to be replicable? Clues to answers: No,and don't know ,but given answer to first question,why risk it? gbal Link to comment Share on other sites More sharing options...
Dac9976 Posted October 30, 2016 Author Report Share Posted October 30, 2016 Well I'm glad I've done this load development as I have now got an even better accurate load. I wasn't chasing velocity I was chasing performance. Also I wanted to know why it is quite slow and was hoping I could get some answer's after all we are all learning new stuff all the time, I like to know the reason's why. Cheers Danny. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.