Jump to content

Recommended Posts

a mild Loctite on the threads might help and heating will remove it but to be honest that's not a great solution you really need to get the threads sorted out and good screws fitted and torqued , I've had all my rifles fitted with bigger screws , only the 300rum was an issue but I thought belt and braces ?

Link to comment
Share on other sites

David,

 

Re. your 'glue' aka 'industrial adhesives' have a look through this: http://hybris.cms.henkel.com/medias/sys_master/catalogsync/9030422331422.pdf

 

something like the 242 would be suitable. FYI the blue coloured Loctite's are medium strength, red are high.

 

There is no reason you cannot put some Loctite between the underside of the rail and the top of the receiver, it will be doing the same job of, as you put it 'gluing' the parts together!

 

Just make sure all the components are clean- you cannot stick oil to anything :) . Also the thread locking fluid takes time to go off and be sure you do not screw anything together with the bolt in place as some screw holes go right into the action.

 

Brgds

 

Terry

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy