Grouse Posted December 3, 2014 Report Share Posted December 3, 2014 Anybody tell me please if you can buy the micrometer adjustment and fit it to any of the Wilson seating dies? Have 223, 6BR and 260 and it would be handy to use the micrometer for fine tuning depths? Also are the micrometer top accurate and repeatable? Regards Grouse Link to comment Share on other sites More sharing options...
1967spud Posted December 3, 2014 Report Share Posted December 3, 2014 yes rich got them here give us aring Link to comment Share on other sites More sharing options...
Grouse Posted December 3, 2014 Author Report Share Posted December 3, 2014 Haha that was quick Spud, had a bet with myself that you would be the first to reply - and I'm "winner winner chicken dinner!" Can one micrometer body be used for all my stems? Link to comment Share on other sites More sharing options...
The Gun Pimp Posted December 3, 2014 Report Share Posted December 3, 2014 Maybe a cheaper and more reliable option would be a set of 'Skips Shims' from Sinclair. These are in one thou. increments and fit between the top and die body. Most benchresters use them with Wilson hand-dies for making accurate fine (and repeatable) adjustments to seating depth. About $12 a set. Part no. 749-001-370ST for 224/6mm and 749-001-326ST for 25/30 cal. Link to comment Share on other sites More sharing options...
1967spud Posted December 3, 2014 Report Share Posted December 3, 2014 shims in stock as well and yes they can be swapped Link to comment Share on other sites More sharing options...
jcampbellsmith Posted December 3, 2014 Report Share Posted December 3, 2014 There seem to be a couple of options. Upgrading with one of these http://www.sinclairintl.com/reloading-equipment/reloading-dies/replacement-parts-amp-upgrades/sinclair-wilson-micrometer-seater-top-sku749005419-36021-68911.aspx Or starting from scratch with one of these http://www.sinclairintl.com/reloading-equipment/reloading-dies/rifle-dies/micro-adjust-bullet-seaters-prod65610.aspx Regards JCS Link to comment Share on other sites More sharing options...
Laurie Posted December 3, 2014 Report Share Posted December 3, 2014 or, an extra Wilson seater die bullet cap and stem at $25.99, or more than one depending on how many bullets are loaded, (plus the Skip's shims set for fine tuning) having a cap/stem set for a single bullet. Note that the standard Wilson stems may be too shallow for VLD bullets' noses too, a recipe for terrible runout on the finished round. 7mm Berger VLDs (168 and 180) aren't properly supported in the standard stem ... can't comment on others. (Not by any means just a Wilson problem - essential to do a bullet fit check with any make of die when loading any of today's very long pointy bullets!) Sinclair / Wilson do alternative 'VLD seater stems'. Not cheap though at $22.99 a time. The new combined Wilson / Sinclair die looks nice, but $199.99 worth nice when it's not 'on sale'? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.