6.5shooter Posted April 2, 2012 Report Share Posted April 2, 2012 Hi all, Im currently having my rpa restocked. It was sat in an accuracy intl stock which was not bedded. Its now going into a stock which will be pillar bedded. My question is will I have to work up a new load? Will the new stock with different bedding change the harmonics over the v block system it sat in before? Regards Garry Link to comment Share on other sites More sharing options...
Chris-NZ Posted April 2, 2012 Report Share Posted April 2, 2012 Anyone who is willing to give you a definitive answer on this one is either brave or stoopid.. Far too many variables involved. "Shoot it and see" would be the honest answer. Chris-NZ Link to comment Share on other sites More sharing options...
Tuck Posted April 4, 2012 Report Share Posted April 4, 2012 Have to agree with chris on this one one of those suck it and see!!! Have had rifles not bedded that shoot very well but both rifles I currently own are bedded both shoot lovely Link to comment Share on other sites More sharing options...
1967spud Posted April 4, 2012 Report Share Posted April 4, 2012 You will not have to not re-do your load data, unless you dont - do or not do it as a power for the course in the do, dont argument as stated else where in sub-scetion A paragraph 2. Or what chris said. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.