lee w 118 Posted September 28, 2011 Report Share Posted September 28, 2011 hi there lads im havin a sako 85 in a A5 stock who can do the inlet work they do not hold sako 85 actions to do a full inlet so have to have a basic ie barrell channel done that leaves me with the action and bottom metal,who do you recommend i dont want to send me action to the mcmillan shop,it is a sako .223 85.i hope someone can help me out cheers LEE Link to comment Share on other sites More sharing options...
baldie Posted September 28, 2011 Report Share Posted September 28, 2011 Hi Lee, The chap i told you about this morning is Neil McKillop, aka dasherman on here. Neil has a cnc mill and should be able to help you out. Someone will come along with his number, or just drop him a PM. Link to comment Share on other sites More sharing options...
terryh Posted September 28, 2011 Report Share Posted September 28, 2011 Dave, How much difference is there between the 75 and the 85 in the bedding area? McM definitly do a 75 inlet. might be a better start? Terry Link to comment Share on other sites More sharing options...
lee w 118 Posted September 28, 2011 Author Report Share Posted September 28, 2011 Dave, How much difference is there between the 75 and the 85 in the bedding area? McM definitly do a 75 inlet. might be a better start? Terry hi there terry they have 75sako inlet,but not 85 phoned GMK for dims,totaly different. im tryin to contact,dasherman to have a word on the work to be done. Link to comment Share on other sites More sharing options...
garyw Posted September 29, 2011 Report Share Posted September 29, 2011 Got a chainsaw if you want,and a bit of glass paper. Link to comment Share on other sites More sharing options...
lee w 118 Posted September 29, 2011 Author Report Share Posted September 29, 2011 Got a chainsaw if you want,and a bit of glass paper. you have to laugh garry or you will go mad.i always do it the hard way,but it will be worth it at the end Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.