ejg223 Posted December 14, 2010 Report Share Posted December 14, 2010 Finally got our T3 stock production started. I made myself the first out of the mould. All carbon fiber/epoxy with a few Kevlar bits inside. Integrated carbon pillars. Duracoated with 80% tac woodland green + 20% Tac Black. Stock weighs 713 grams. Ultra strong, stiff and ambidextrous. The high position of the recoil pad will soak up recoil better and avoid barrel flip. The metall bolt shroud, bolt handle and rail are from Roedale. The original plastic bolt shroud was cracked when I got the rifle. edi Link to comment Share on other sites More sharing options...
Scotch_egg Posted December 14, 2010 Report Share Posted December 14, 2010 This stock really makes me regreet selling my T3 .223 Very nice bit of kit you are producing eddie. Link to comment Share on other sites More sharing options...
Scotch_egg Posted December 14, 2010 Report Share Posted December 14, 2010 What rings are your running eddie? Link to comment Share on other sites More sharing options...
ejg223 Posted December 14, 2010 Author Report Share Posted December 14, 2010 What rings are your running eddie? Thanks Scotch, they are Recknagel medium high. Solid, bottom moveable side is sprung loaded making mounting a bit easier. Mounts are not that heavy either. edi Link to comment Share on other sites More sharing options...
Ronin Posted December 15, 2010 Report Share Posted December 15, 2010 Like the look of this Edi Had I a T3, I would look seriously at getting one. Link to comment Share on other sites More sharing options...
Fergal Posted December 15, 2010 Report Share Posted December 15, 2010 Looks good man, very impressive, I might have a client for one of them over the Christmas break. Ill keep you posted on that. Link to comment Share on other sites More sharing options...
ejg223 Posted December 15, 2010 Author Report Share Posted December 15, 2010 Looks good man, very impressive, I might have a client for one of them over the Christmas break. Ill keep you posted on that. Thanks Ronin & Fergal, The shape of the stock should work very well with a heavy recoiling rifle. Fergal if you have a T3 30-06 upwards in the shop we could give it a try. edi Link to comment Share on other sites More sharing options...
Fergal Posted December 15, 2010 Report Share Posted December 15, 2010 Thanks Ronin & Fergal, The shape of the stock should work very well with a heavy recoiling rifle. Fergal if you have a T3 30-06 upwards in the shop we could give it a try. edi Ill have a .300WM shortly thats the one Im on about, its a .308 at present but its being changed to a .300, not sure if the barrel channel would take it though as its a heavy Palma profile. Link to comment Share on other sites More sharing options...
jma Posted December 15, 2010 Report Share Posted December 15, 2010 This stock really makes me regreet selling my T3 .223 Very nice bit of kit you are producing eddie. Same here Scotch same here, to this day i do not know why i sold my T3 either. regards jma Link to comment Share on other sites More sharing options...
Streeker59 Posted December 23, 2010 Report Share Posted December 23, 2010 Edi.. Next year i'm planning on a Robertson tactical for one of my T3's. If you can produce a tactical stock without the stippling, i'd be very interested. It wouldn't have to have an adjustable cheek piece as i like to keep my scope low but the pistol grip must have a vertical drop and not sloping.. Is this a possibility mate ? Grant.. Link to comment Share on other sites More sharing options...
ejg223 Posted December 23, 2010 Author Report Share Posted December 23, 2010 Edi.. Next year i'm planning on a Robertson tactical for one of my T3's. If you can produce a tactical stock without the stippling, i'd be very interested. It wouldn't have to have an adjustable cheek piece as i like to keep my scope low but the pistol grip must have a vertical drop and not sloping.. Is this a possibility mate ? Grant.. Grant, if the forend is ok I'm sure the comb is high enough and I'm sure the buttpad position is high enough, then it' would only be the pistol grip. If I send you a pic of side on, you could draw the pistol grip the way you would like it, I'll tell you if we can do it. Sometimes changes are easy to do, sometimes not. The pistol grip should be dooable. I have A5's here for reference. Our pistol grips are quite long anyway. edi Link to comment Share on other sites More sharing options...
lancslad Posted December 30, 2010 Report Share Posted December 30, 2010 MMMMMMM.... nice looking bit of kit...... Next question..............can you inlet for lefty hand? If so, can you PM me with price, got a .223 T3 Lite that Im considering a new stock for, used for stalking so something nice and lightweight. Also, where you located, would like a "handle" before commiting. Link to comment Share on other sites More sharing options...
ejg223 Posted December 30, 2010 Author Report Share Posted December 30, 2010 MMMMMMM.... nice looking bit of kit...... Next question..............can you inlet for lefty hand? If so, can you PM me with price, got a .223 T3 Lite that Im considering a new stock for, used for stalking so something nice and lightweight. Also, where you located, would like a "handle" before commiting. Inletting for a lefty would mean a conversion and I wouldn't have a lefty rifle around to confirm if all is ok. Certainly doable. pm on it's way edi Link to comment Share on other sites More sharing options...
mark Posted January 17, 2011 Report Share Posted January 17, 2011 [Got a tikka t3 light 30-06 which i am thinking of changing the stock for a custom job Mainly used for deer stalking what can you supply to fit my gun its right handed. Also what colour options are there, and finally the cost Will be looking to purchase in next week or so please mail me with options price to mmbeatle@o2.co.uk Link to comment Share on other sites More sharing options...
ejg223 Posted January 17, 2011 Author Report Share Posted January 17, 2011 [Got a tikka t3 light 30-06 which i am thinking of changing the stock for a custom job Mainly used for deer stalking what can you supply to fit my gun its right handed. Also what colour options are there, and finally the cost Will be looking to purchase in next week or so please mail me with options price to mmbeatle@o2.co.uk PM& e-mail sent cheers edi Link to comment Share on other sites More sharing options...
brown dog Posted January 17, 2011 Report Share Posted January 17, 2011 Edi, Wondering if the PSE T4 has had a chance to move forward? (can't remeber when it was last mentioned so apologies if I'm asking too soon!) Link to comment Share on other sites More sharing options...
ejg223 Posted January 17, 2011 Author Report Share Posted January 17, 2011 Edi, Wondering if the PSE T4 has had a chance to move forward? (can't remeber when it was last mentioned so apologies if I'm asking too soon!) Had the prototype in my hands today.... early stages Again...we were sketching a few ideas for our adjustable cheekpiece today but have not come across anything really good yet. How important is the left right adjustment on a cheek piece? Is that needed? Would a spacer system for the butt pad be ok or would something more sophisticated be wanted? Maybe you and your bag of kids dough should drop over for a weekend... Oh, still hoping to have it ready for the IWA edi Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.