gyr Posted April 14, 2018 Report Share Posted April 14, 2018 Hello has someone tríed Rs50 on a 308 with the 155 scenars? Thanks Link to comment Share on other sites More sharing options...
Roy W Posted April 15, 2018 Report Share Posted April 15, 2018 Yep, 46 grains Link to comment Share on other sites More sharing options...
Andy RV Posted April 15, 2018 Report Share Posted April 15, 2018 I got the best accuracy at 45.5gr out of my 20” Tikka CTR, MV is 800m/s. Link to comment Share on other sites More sharing options...
VarmLR Posted April 15, 2018 Report Share Posted April 15, 2018 +1 to 45.5 Link to comment Share on other sites More sharing options...
buddy.223 Posted April 16, 2018 Report Share Posted April 16, 2018 looking for a varget altern 2 of us did a test with RS50 and the 155sc using our 30" ftr rigs using both lp & palma lapua brass with varius primers .the large primer brass topped out at 46g @ 2922fps es 14 ,@ 46.3g 2915 es 23, 46.6 2908 es 37 not much diff between the fed 210 and the cci brs.45.7g gave single fig es bang on 2900 . the palma brass using the cci 450 s topped out on 45.8 @ 2864 FPS es 20, with 46g 2860, 46.2 2858. with the cci br s 46g gave 2902 es 5 and @ 46.2 2894 es 16. we found the same thing with the .223 using 69S topped out @ 3000fps on 25.5 any more and the speed reversed. seems to perform best lowest es with a gap between bullet and powder charge with compressed charge es was poor even with compressed loads the were no pressure signs, found it a little smokey on firing but not to dirty Link to comment Share on other sites More sharing options...
Brillo Posted April 16, 2018 Report Share Posted April 16, 2018 Yes. 46.8 grains. The Lapua 155 bullet is a cracker but IMHO you need a long throat to get the best out of them. Link to comment Share on other sites More sharing options...
gyr Posted April 16, 2018 Author Report Share Posted April 16, 2018 many thanks for the info. i Will give it a try. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.