Guest dasherman Posted January 22, 2009 Report Share Posted January 22, 2009 Has anyone got a barrel tenon drawings for Barnard S and P actions? Got 3 to do and the Kiwis are not replying to my emails. Cheers Neil. Link to comment Share on other sites More sharing options...
Ronin Posted January 22, 2009 Report Share Posted January 22, 2009 Neil Ive done a few of these (P actions,, including my own), I have kept the dimesions and will forward via PM for you, takes a bit of latteral thinking to get your head around the cone bolt of the P. I havent a drawing, but taken own measurement which appear to work! Will do it AM as had half bottle of Red and want to be sure what I send is correct...and should give you a steer. They are lovely to do...speak in the morning. Link to comment Share on other sites More sharing options...
Chris-NZ Posted January 22, 2009 Report Share Posted January 22, 2009 Has anyone got a barrel tenon drawings for Barnard S and P actions? Got 3 to do and the Kiwis are not replying to my emails.Cheers Neil. This prompted me to ring them Neil (had to order an S for myself) and I took the opportunity to remind him! Yes, he'll get onto it.. Hope he lives up to the promise Chris-NZ Link to comment Share on other sites More sharing options...
Vermincinerator Posted January 23, 2009 Report Share Posted January 23, 2009 Has anyone got a barrel tenon drawings for Barnard S and P actions? Got 3 to do and the Kiwis are not replying to my emails.Cheers Neil. As an Engineer and rifle maker isn't that something you should be able measure and calculate????? Ian. Link to comment Share on other sites More sharing options...
Guest dasherman Posted January 23, 2009 Report Share Posted January 23, 2009 I didn't ask for smart comments, only information which others have kindly supplied. I will measure it and work it out but if someone has the actual factory drawing I could check my measurements against it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.