bramble basher Posted June 29, 2008 Report Share Posted June 29, 2008 just picked a box of 55gn Berger's (varmint) from norm Clarke at the basc show bodelwyddan does anybody use these in a 22-250 any info gladly accepted and used with caution cheers Simon Link to comment Share on other sites More sharing options...
Andrew Posted June 29, 2008 Report Share Posted June 29, 2008 You might as well take the 55 grain load you're using now and give it a whirl with these bullets. There is little to no likelihood that someone else's load with these bullets will be The One for your rifle. If you have a good 55 grain load now, substitute the Berger, then adjust the seating depth for best accuracy. (It's what I do, at least.)~Andrew Link to comment Share on other sites More sharing options...
Alycidon Posted June 29, 2008 Report Share Posted June 29, 2008 Just back the load down 10% or so to start with, bullet manufacturers outside diameters do vary, this will affect pressure. A Link to comment Share on other sites More sharing options...
Vermincinerator Posted June 29, 2008 Report Share Posted June 29, 2008 Hi Bramble, I used them in my fireforming load for my 22-250 AI. 34.5grns of Vit 140 sparked by a 210M primer had them doing 3380fps and sub 1/3 moa 5 shot groups @ 100yds Ian. Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.